Hi-Bond HAS 945 Black Anti-Slip Fluorescent Tape, 50mm x 18m

  • RS-stocknr. 686-1090
  • Fabrikantnummer HAS 945
  • Fabrikant Hi-Bond
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: KR
Productomschrijving

Black Photo-Luminescent Anti-Slip Tape

50mm wide roll of 60 grit anti-slip tape with a photo-luminescent strip inlay.

For internal applications
Photo-luminescent strip in case of a black-out or for use in areas of poor visibility
For use on stair and step edges, entrance hallways and exits
Ideal for public buildings such as cinemas and theatres

Entrance

Entrance mats can save up to 70% of all dirt and debris from being carried inside a building. They help to protect the interior floor coverings from damage for a longer life span. Water and moisture are efficiently absorbed reducing slip hazards. Entrance mats are a simple, economic measure to reduce cleaning and maintenance, both in terms of time and cost. They also improve the aesthetic appearance of a reception area.,The correct quality of matting in the workplace will help eliminate the risk of slips and falls, insulate against electricity, deaden sound, trap and hold dirt and moisture from spreading, resist chemicals, grease, oils and flames, and reduce worker fatigue and stress.

Specificaties
Kenmerk Waarde
Colour Black
Slip Resistant Yes
Width 50mm
Length 18m
Maximum Operating Temperature +50°C
Minimum Operating Temperature -30°C
Model Number HAS 945
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
106,82
(excl. BTW)
129,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 106,82
Related Products
There is no electrolytic corrosion factor associated with ...
Description:
There is no electrolytic corrosion factor associated with these products. Tesa® non-slip adhesive tapes are partially fluorescent.Their rough, slip-resistant surface offers excellent adhesion.They are resistant to water, temperature, UV and cleaning products.They have an EAN label.
There is no electrolytic corrosion factor associated with ...
Description:
There is no electrolytic corrosion factor associated with these products. Tesa® non-slip adhesive tapes are partially fluorescent.Their rough, slip-resistant surface offers excellent adhesion.They are resistant to water, temperature, UV and cleaning products.They have an EAN label.
The course anti-slip tape is especially designed to ...
Description:
The course anti-slip tape is especially designed to prevent any slips or trips within the workplace and especially effective with ramps, heavy traffic corridors, fire escapes, ladders, stairs including kitchens with dirty and wet oily floors. This ant-slip tape is ...
AT2000 is an aluminium oxide/silicon carbide abrasive grit ...
Description:
AT2000 is an aluminium oxide/silicon carbide abrasive grit bonded to a tough and durable PVC backing with a solvent based acrylic adhesive and paper release liner designed for the many different requirements of professionals and industries such as the building, ...