Electrolube 400 ml Aerosol Flux Remover for PCBs

  • RS-stocknr. 205-8449
  • Fabrikantnummer FLU400DB
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Fluxclene

A fast drying cleaner formulated for the quick and efficient removal of flux residues after soldering, and acrylic conformal coatings from PCBs.

Supplied with brush on trigger button to aid cleaning
May affect some plastics, test on sample prior to use

Electrolube Flux Remover Aerosol

The Electrolube 400ml flux remover aerosol is a fast-drying solvent cleaner, especially formulated for the quick and efficient removal of flux residues after soldering. It is originally designed to replace ozone-depleting solvents such as CFC-113. It exhibits enhanced cleaning performance and fast evaporation rates, easily giving MIL-STD cleanliness.
Warning:
Flammable solvent. Do not use on live equipment or other sources of ignition.

Features and Benefits

• Removes flux residues after soldering ideal for manual PCB cleaning applications
• Non-halogenated cleaning solvent
will not attack the ozone layer
• Dries without leaving any residue
leaves a clean, dry surface in one cleaning step
• CO2 propelled aerosol version available
20% more active cleaner and can be used at 360⁰ orientation

Applications

• PCBs
• Sockets

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Warning

  • Flammable solvent, do not use on live equipment or other sources of ignition.

Warning

  • Flammable solvent, do not spray onto live electrical equipment or other sources of ignition.
Specificaties
Kenmerk Waarde
Package Size 400 ml
Package Type Aerosol
Application PCBs
Trade Name FLU
385 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 14,96
13,20
(excl. BTW)
15,97
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 13,20
6 - 14
€ 12,68
15 +
€ 12,41
Related Products
KONTAKT PCC is a special cleaner for removing ...
Description:
KONTAKT PCC is a special cleaner for removing flux remains and dirt on printed circuit boards. Printed circuit board cleanerCleaner and flux remover for printed circuit boardsRemoves flux residues from electronic assembliesSpecial mixture of organic solventsFree from CFC and HCFCComes ...
Flux-Off from Cramolin is an effective but gentle, ...
Description:
Flux-Off from Cramolin is an effective but gentle, colourless cleaner designed for removing the toughest deposits of organic flux and soldering oils from your PCBs. The pulling lubricant is also used for degreasing your installations and appliances. Attached extension tube ...
Powerful cleaner removes R, RA, RMA, and No ...
Description:
Powerful cleaner removes R, RA, RMA, and No Clean Non-corrosive, safe for metals FlammableExtra-strengthFast dryingRemoves encrusted, baked on fluxes All-Way Spray BrushClean System200ml AerosolSuitable for use on: Chip Carriers, Heat Sinks, Metal Housings and Chassis, Printed Circuit Boards, Plugs, Relays ...
Effectively removes all types of solder paste and ...
Description:
Effectively removes all types of solder paste and uncured adhesive from screens, misprinted boards and equipment. Completely safe on stencils, squeegees, and equipment surfaces. Safer replacement for IPA cleanersQuickly cleans paste or uncured adhesiveNon-flammableLow VOC, zero GWP.