Contact Element Foot Switch Contact Block for Foot Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

XPE Metal Footswitches

Metal housed footswitches, with or without protective guard cover. The guarded cover types are strongly recommended in high risk areas where accidental starting of the machine, either by human action or falling objects can occur. Footswitches featuring 2 step contact operation are ideal for applications involving 2 speed machines. The first step (6mm travel) operates one set of NC + NO contacts before the second step operates the other NC + NO contacts during full actuator travel (12mm). The trigger action types enable locking of the pedal in rest position, positive action is required before the pedal can be depressed.

Available with or without trigger mechanism in 1 or 2 step configurations
Large surface area of pedal assures stability of foot and operator comfort
High and wide protective cover accommodates both large size and safety boots
Can be fixed to the floor or on a support for improved stability
Blue IP66 metal housing

Approvals

CSA

Industrial Duty Footswitches

A range of robust footswitches suited for industrial environments issuing start and normal stop instructions to many types of machines. They allow the operator greater freedom of movement.

Specificaties
Kenmerk Waarde
Accessory Type Contact Element
For Use With Foot Switch
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,10
(excl. BTW)
14,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 12,10
5 - 9
€ 11,73
10 +
€ 11,35
Related Products
Auxiliary contacts consisiting of N/O and N/C contacts ...
Description:
Auxiliary contacts consisiting of N/O and N/C contacts to be used with the following switched interlocks:. 32A versions fit 367-4058, 367-4064, 367-4086, 367-409263A versions fit 367-0567, 367-4070, 367-4121, 367-4115.
Telemecanique contact blocks for the XCK limit switch ...
Description:
Telemecanique contact blocks for the XCK limit switch range. Available in a variety of contact configuration types to suit all applications.
Self Monitoring N/O contact automatically closes when the ...
Description:
Self Monitoring N/O contact automatically closes when the contact block is correctly installed on the operator, in this condition the emergency stop N/C contact operates conventionally. If the contact block should come detached from the emergency stop body the Self ...
This range of Head Emergency Buttons are used ...
Description:
This range of Head Emergency Buttons are used in control cabinets, control panels, in elevator construction, on conveyor or transport plants. After the manual actuation, the components initiate or switch off work processes and functional processes.The range of NDR Series ...