TE Connectivity PIDG Series Insulated Crimp Spade Connector, 2.6mm² to 6.6mm², 12AWG to 10AWG, M4 Stud Size Nylon,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

TE Connectivity PIDG Spade Tongue Wire Crimp Terminals

PIDG (Pre-Insulated Diamond Grip) spade tongue wire crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG spade tongue terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG spade terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. These PIDG spade terminals also feature a funnelled wire entry which prevents turned back wire strands and allows fast wire insertion during high-speed production. Available with various wire, barrel and stud sizes, these PIDG spde terminals offer a versatile solution to a wide range of wiring applications

Features and Benefits

• High conductivity copper body
• Copper sleeve for improved wire insulation support
• Serrations in wire barrel for maximum contact and tensile strength
• Colour coded sleeves for easy wire size and tooling identification
• Funnelled wire entry for easy wire insertion
• Designed enables a reliable and uniform crimp

Product Application Information

These PIDG spade tongue wire crimp terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

Approvals

UL recognised (Approvals only apply to the packs of 100, and only for those terminals marked with an asterisk).

Approvals

MIL-T-7928 / BS4G178 / UL recognised

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Series PIDG
Insulation Insulated
Insulation Material Nylon
Width 10.31mm
Minimum Wire Size mm² 2.6mm²
Maximum Wire Size mm² 6.6mm²
Minimum Wire Size AWG 12AWG
Maximum Wire Size AWG 10AWG
Stud Size M4
Colour Yellow
Overall Length 27.81mm
Contact Plating Tin
Contact Material Copper
4500 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Box of 500)
0,354
(excl. BTW)
0,428
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
500 +
€ 0,354
€ 177,00
*prijsindicatie
Related Products
CERTI-SEAL telephone wire splices designed for direct buried ...
Description:
CERTI-SEAL telephone wire splices designed for direct buried splicing and repair of damaged telecom and data cables. These CERTI-SEAL telephone wire splices have a one piece snap-on housing and are filled with a water resistant gel that seals out the ...
Insulated crimp spade terminals made from tin plated ...
Description:
Insulated crimp spade terminals made from tin plated copper with conically tapered halogen free plastic insulation sleeves. These insulated crimp spade terminals feature the 'EASY ENTRY' system. Insulated versions are halogen-free and feature "EASY ENTRY" technologyContact material: Copper silver plated. ...
Fork adapter compatible with all 4 mm male ...
Description:
Fork adapter compatible with all 4 mm male plugs.The fork is suitable for fixing screws up to 4.1 mm in diameter, such as those on relays, contactors etc.Supplied in pairs. For use in education, research and development etc.
A range of insulated spade tongue crimp terminals ...
Description:
A range of insulated spade tongue crimp terminals from JST made from tin-plated oxygen free copper. JST part numbers Vxxx are straight-entry terminals with brazed seamsJST part numbers FVWSxxx are flared-entry terminals with butted seams. • Vinyl insulation• Straight or ...