Aim-TTi PFM3000 Frequency Counter 3GHz RS Calibration

  • RS-stocknr. 487-864
  • Fabrikantnummer PFM3000
  • Fabrikant Aim-TTi
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Aim-TTi Frequency Counter PFM3000 3.0GHz Handheld Reciprocal Counting

A sophisticated counter with a large LCD display that uses a reciprocal counting measurement technique to achieve fast response and high resolution at all frequencies.

Wide frequency range of <3Hz to >3000MHzHigh sensitivity across the frequency bandHigh impedance measurement up to 125MHzPeriod measurement from 8ns to 330ms8 digits of resolution at 1 sec. measurementLow pass filter for noise suppressionData hold function to freeze display readingLong battery life and push-to-measure functionPowered by PP3 Alkaline battery; Stock no. 394-9059 (not supplied)

Supplied with

user manual

Aim-TTi Frequency Counter

The Aim-TTi frequency counter PFM3000 offers high sensitivity frequency measurement from 3Hz to more than 3GHz. It also performs period measurement from 8ns to 330ms. This frequency counter uses a continuous reciprocal measurement technique to provide high resolution at all the frequencies with a rapid update. It offers high sensitivity across the whole frequency range. A low pass filter reduces high-frequency signal noise at lower frequencies.

Features and Benefits


3Hz to 3000MHz in two overlapping ranges
• High input sensitivity over the full frequency range
• High impedance measurement up to 125MHz
• Period measurement from 3Hz to 125MHz
• Selectable measurement time and display hold function
• Large 8.5-digit display with full range of annunciators
• Battery operation handheld format with tilt-stand
• Push-to-measure function with auto power-down

Applications


Data communication
• Embedded systems
• RF and microwaves
• Laboratories

Certifications


EN61010-1
• EN61326

Specificaties
Kenmerk Waarde
Maximum Frequency 3GHz
Minimum Frequency 3 Hz
Resolution 6 Digit
Calibrated RSCAL
Maximum Internal Counter 188888888
Maximum Input Voltage 30V ac/dc
Input Impedance 1 MΩ, 50 Ω
Measurement Time 10s
Dimensions 178 x 81 x 30mm
Minimum Operating Temperature +5°C
Maximum Operating Temperature +40°C
Model Number p PFM3000
Height 30mm
Weight 190g
Width 81mm
Length 178mm
7 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
243,00
(excl. BTW)
294,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 243,00
Related Products
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...
The Omron H7EC series digital counter is an ...
Description:
The Omron H7EC series digital counter is an 8-digit LCD display, panel mount, self-powered device. This counter is available with a 7-segment no backlight large display with an 8.6mm character height. The H7E family includes total counters, time counters, tachometers ...
8 digit LCD counter for applications without power ...
Description:
8 digit LCD counter for applications without power supply (battery powered)Frequency meter to measure 1/sVery good readability due to leading zero blanking and 8mm digit heightBezels for screw mounting includedEasy to use, no programming requiredPanel cut-out: 22.2mm x 45mmOperating temperature: ...
The Kubler CODIX 140 series digital counter is ...
Description:
The Kubler CODIX 140 series digital counter is a 7-digit LCD display designed for NPN/PNP input signal panel mount pulse counter. It has a supply voltage rating ranging between 10VDC and 30VDC. It has a multifunction reset key, lockable via ...