- RS-stocknr.:
- 202-3047
- Fabrikantnummer:
- LFR-1/4-D-MINI-KC-A
- Fabrikant:
- Festo
11 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 242,06
(excl. BTW)
€ 292,89
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 242,06 |
- RS-stocknr.:
- 202-3047
- Fabrikantnummer:
- LFR-1/4-D-MINI-KC-A
- Fabrikant:
- Festo
Wetgeving en compliance
- Land van herkomst:
- HU
Productomschrijving
Festo Automatic Drain, G 1/4, 40 μm Filtration Size - LFR Series - LFR-1/4-D-MINI-KC-A
Use this Festo filter regulator to clean and control the supply of compressed air to downstream pneumatic equipment. The modular component includes a lubricator to add controlled quantities of tool oil into the system, which is necessary to reduce the friction of moving parts. You can set a fixed operating pressure with the lockable rotary knob. An automatic drain eliminates the need for manual condensate release. Components like these with a filtration size of 40 microns are ideal for protecting most industrial pneumatic equipment from contaminants.
• One-way flow control function
• G 1/4 port connection
• Maximum condensate volume of 22 cm³
• Operating pressure of 2 bar to 12 bar
• Standard nominal flow rate of 1150 l/min
• Threaded mounting type for assembly in any position
• Slotted head screw adjusting element
• Ambient temperature range of -10°C to +60°C
• Mini size
• G 1/4 port connection
• Maximum condensate volume of 22 cm³
• Operating pressure of 2 bar to 12 bar
• Standard nominal flow rate of 1150 l/min
• Threaded mounting type for assembly in any position
• Slotted head screw adjusting element
• Ambient temperature range of -10°C to +60°C
• Mini size
Range Information
• Festo D series includes space-saving components that combine a filter and regulator in a single unit
• There are manual, semi-automatic or fully automatic condensate drain options
• All FLR D series units feature good particle separation and high flow rates for the optimal supply of compressed air
• The units have low hysteresis (lag) and perform consistently despite varying pressure
• There are manual, semi-automatic or fully automatic condensate drain options
• All FLR D series units feature good particle separation and high flow rates for the optimal supply of compressed air
• The units have low hysteresis (lag) and perform consistently despite varying pressure
The Festo one-way flow control function for supply air with swivel joint has a threaded mounting type and can be assembled in any position. Here, threaded plug is made of brass material with a zinc die-casting for swivel fitting. Its pneumatic connection
Ambient temperature -10 to 60 °C
Slotted head screw adjusting element
Slotted head screw adjusting element
Specificaties
Kenmerk | Waarde |
---|---|
Port Connection | G 1/4 |
Integrated Pressure Gauge | With Pressure Gauge |
Drain Type | Automatic |
Manufacturer Series | LFR |
Filtration Size | 40µm |
Pressure Gauge Port Size | G 1/4 |
Minimum Operating Pressure | 2bar |
Port Connection Thread Size | 1/4 in |
Port Connection Thread Standard | G |
Maximum Operating Pressure | 12 bar |
Pressure Setting Range | 0.05 → 1.2MPa |
Bowl Material | Polycarbonate |
Minimum Pressure Setting | 0.05MPa |
Pressure Gauge Port Thread Size | 1/4 in |
Maximum Pressure Setting | 1.2MPa |