Entrelec Fused DIN Rail Terminal, MB Series, 10 (stranded) mm², 16 (solid) mm², 600 V, 10A, 5 x 20mm Fuse, Grey

  • RS-stocknr. 424-822
  • Fabrikantnummer 1SNA111033R0300
  • Fabrikant Entrelec
Wetgeving en compliance
Land van herkomst: FR

Fused Terminals

Two versions of fused terminals
The latched, pull up fuse terminals are available for 1 1/4 in. x 1/4 in., BS1362 and 5x20mm/5x25mm fuses
The screw cap fused terminals are suited to 5x20mm fuses and is available with or without a neon (110-220V) indicator


The fuseholder limits the rating to 250V/16A irrespective of markings on the terminals


UL listed, CSA certified.


1, 2

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569


Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Kenmerk Waarde
Wire Size 16 AWG
Cable CSA 10 (stranded) mm², 16 (solid) mm²
Colour Grey
Pitch 12mm
Fuse Size 5 x 20mm
Current Rating 10A
Voltage Rating 600 V
Termination Method Screw Clamp
Rail Type Compatibility G, Top Hat
Series MB
Maximum Operating Temperature +110°C
Minimum Operating Temperature -55°C
75 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
315 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 5,386
€ 26,93
Related Products
ABB series of Fused terminals with a lever ...
ABB series of Fused terminals with a lever action fuse carrier, the standard product accepts both 20´5mm and 25´5mm fuses whilst terminals with ’fuse failed’ indication are suited to 20´5mm fuse links only.Fuse failed indication terminals are available either a ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This Weidmüller Fuse terminal is available in two ...
This Weidmüller Fuse terminal is available in two different types, Fuse terminal with pivoting retaining lever and Fuse terminal with plug in SIHA fuse holder. The fuse holder is opened lever style and the fuse is shrouded when installed,Single LED ...
The ’W’ series screw clamp terminals are suitable ...
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...