Weidmuller Fused DIN Rail Terminal, ASK Series, 300 V, 10A, 5 x 20 Fuse, Brown Single

  • RS-stocknr. 454-485
  • Fabrikantnummer ASK 1 -376760000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: RO
Productomschrijving

Fused

SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362.ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of the fuse.,KSK lock up: This range of fuse holders feature a black lock up fuse carrier, which is drawn up to its full extent to the open position, enabling fuses to be replaced easily without endangering the operative.The carrier has the fuse size moulded in to enable correct selection of fuse size. Available for fuse sizes 20x5mm, 1x in. and 1 x in.

Note

For use with TS35 DIN Rail - 283-5690

Approvals

7777

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 26 → 12 AWG
Colour Brown
Pitch 8mm
Fuse Size 5 x 20
Current Rating 10A
Voltage Rating 300 V
Termination Method Screw Down
Rail Type Compatibility TS32
Series ASK
Maximum Operating Temperature +100°C
Minimum Operating Temperature -50°C
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
510 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
6,036
(excl. BTW)
7,304
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 6,036
€ 30,18
*prijsindicatie
Related Products
The Weidmuller ’W’ series fused terminals with standard ...
Description:
The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection. Screw clamp connectionEasy snap-on mountingCurrent Rating 6.3 Amps.
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
The small spring mechanism in these terminals provides ...
Description:
The small spring mechanism in these terminals provides significant space saving, without sacrificing any of the usual features. Large terminal entry aperture allows bootlace ferruled cables to be fitted up to maximum cable capacity of the terminal.
Fuse terminals (HESI) adopt the functional operation of ...
Description:
Fuse terminals (HESI) adopt the functional operation of the fuse holder and power distributionLever disconnect terminals (HEDI) enable two bridging power sources to be directed separately in parallel (time-saving power supply)G-type fuse insert 5 x 20 mm.