Weidmuller Fused DIN Rail Terminal, WSI Series, 500 V, 6.3A, 1 x 1/4in Fuse, Brown Single

  • RS-stocknr. 454-508
  • Fabrikantnummer WSI 6/2 GZ/DEF63 -1014000000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Fused Terminals

The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection.

Note

The voltage and current ratings are to VDE ratings.
For stock number 425-263 you will need a 20 x 5mm fuse
For stock number 454-508 you will need a 32 x 6.3mm fuse

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

Fuse Isolators WSI 6/2 Series

These WSI 6/2 series fuse isolators are designed for screwable cross connection fused terminal blocks. With easy snap-on mounting and a current rating of 6.3 Amps.

Features & Benefits

Screw clamp connection
Easy snap-on mounting
Current Rating 6.3 Amps

Product Application Information

A tidy and easy to use fuse isolator. Snap-on to your terminal block and screw into place. Ideally suited to industrial and electrical applications giving you protection and damage limitation without needless interruption to your machines or appliances.

Approvals

CSA Certified; UL Listed; Lloyds Register of Shipping

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 20 → 8 AWG
Colour Brown
Pitch 13mm
Fuse Size 1 x 1/4in
Current Rating 6.3A
Voltage Rating 500 V
Termination Method Screw Down
Rail Type Compatibility TS35
Series WSI
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1285 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
Was € 5,60
5,124
(excl. BTW)
6,20
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 5,124
€ 25,62
*prijsindicatie
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
SAKS screw cap: This features a red screw ...
Description:
SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362.ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...