Weidmuller Fused DIN Rail Terminal, ZSI Series, 500 V, 12A, 3 x 32mm Fuse, Beige Single

  • RS-stocknr. 226-0068
  • Fabrikantnummer ZSI 2.5/2 500AC -1616460000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Fuse Terminals

Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the lower half of the terminal is required and a fuse plate, which flips up for easy access, is required for protection of the upper fuse carrier.

Note

The 1 1/4 x 1/4 terminal does not have ATEX Approval.

Approvals

CSA certified, UL listed, SEV, KEMA 00 ATEX 2107U, NEMKO, Lloyds reg. of shipping, SETI

Approvals

1-3, 5-7

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 26 → 12 AWG
Colour Beige
Pitch 12mm
Fuse Size 3 x 32mm
Current Rating 12A
Voltage Rating 500 V
Termination Method Clamp
Rail Type Compatibility TS35
Series ZSI
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
240 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
Was € 4,81
4,198
(excl. BTW)
5,08
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 4,198
€ 20,99
*prijsindicatie
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
SAKS screw cap: This features a red screw ...
Description:
SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362.ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of ...
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...