Weidmuller Fused DIN Rail Terminal, WSI Series, 10 → 36 V dc, 6.3A, 5 x 20mm Fuse, Beige Single

  • RS-stocknr. 235-5352
  • Fabrikantnummer WSI 6/LD 10-36V DC/AC -1011300000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Fused LED

This Weidmüller Fuse terminal is available in two different types, Fuse terminal with pivoting retaining lever and Fuse terminal with plug in SIHA fuse holder. The fuse holder is opened lever style and the fuse is shrouded when installed,Single LED indicates fuse failure

Note

The voltage and current ratings are to VDE ratings.

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Warning

  • With blown fuse the follow on circuit is still under current. Disconnect lever to open circuit.
Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 20 → 8 AWG
Colour Beige
Pitch 7.9mm
Fuse Size 5 x 20mm
Current Rating 6.3A
Voltage Rating 10 → 36 V dc
Termination Method Screw Down
Rail Type Compatibility TS35
Series WSI
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
65 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
675 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 11,92
10,23
(excl. BTW)
12,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 10,23
Related Products
Bases for fixing commining blocks to DIN rail. ...
Description:
Bases for fixing commining blocks to DIN rail. Material: polypropylene, natural colourMaximum continuous operating temperature: 85°CSelf extinguishing: UL 94 - V2; IEC 695-2-1 to 850°C.
Phoenix Contact has engineered its CLIPFIX end brackets ...
Description:
Phoenix Contact has engineered its CLIPFIX end brackets to maintain a secure grip on various compatible DIN rail systems. Design width of just 5.2 mmParking option for bridges and plugsLarge-surface labeling.
DIN Rail variants specifically designed for use with ...
Description:
DIN Rail variants specifically designed for use with a comprehensive range of Omron products. These include relays, terminal blocks and many more. Supplied in common forms such as "Top Hat" rail (RS Stock No. 827-8400 typical).
SAKS screw cap: This features a red screw ...
Description:
SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362.ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of ...