Weidmuller Fused DIN Rail Terminal, W Series, 690 V, 32A, 10 x 38mm Fuse, Beige Single

  • RS-stocknr. 768-4595
  • Fabrikantnummer WSI 25/1 10x38 -1966020000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Fused Terminals

The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection.

Note

The voltage and current ratings are to VDE ratings.
For stock number 425-263 you will need a 20 x 5mm fuse
For stock number 454-508 you will need a 32 x 6.3mm fuse

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

Pivoting Fuse Holder Terminal

These screw connection fuse terminals have a lever action fuse carrier to accommodate fuse cartridges by pivoting the lever into the fully open position. All parts are shrouded for maximum protection during disconnection and closing operations. The benefit of these fuse holders is that they are robust and you do not have to take everything apart to change the fuse.

Features & Benefits

Screw type connection
Pivoting fuse holder
Easy to mount

Product Application Information

Ideally suited to industrial and electrical applications giving you protection and damage limitation. Its clever pivoting feature enables you to replace the fuse easily, without taking everything apart or interfering with adjacent terminals. The holder simply rotates upward. The slim design means that they are space saving too. You can use these components with WMF 2.5 series, ideal when you want to reduce cabinet space but increase signal and wire options.

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 14 → 3 AWG
Number of Connectors 2
Colour Beige
Pitch 18mm
Fuse Size 10 x 38mm
Current Rating 32A
Voltage Rating 690 V
Termination Method Screw Down
Rail Type Compatibility TS35
Series W
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
49 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
145 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,00
(excl. BTW)
7,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 6,00
Related Products
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...