Weidmuller Fused DIN Rail Terminal, W Series, 690 V, 32A, 10 x 38mm Fuse, Beige Single

  • RS-stocknr. 768-4605
  • Fabrikantnummer WSI 25/2 10x38 -1966090000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Fused Terminals

The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection.

Note

The voltage and current ratings are to VDE ratings.
For stock number 425-263 you will need a 20 x 5mm fuse
For stock number 454-508 you will need a 32 x 6.3mm fuse

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

Pivoting Fuse Holder Terminal

These screw connection fuse terminals have a lever action fuse carrier to accommodate fuse cartridges by pivoting the lever into the fully open position. All parts are shrouded for maximum protection during disconnection and closing operations. The benefit of these fuse holders is that they are robust and you do not have to take everything apart to change the fuse.

Screw type connection
Pivoting fuse holder
Easy to mount

Product Application Information

Ideally suited to industrial and electrical applications giving you protection and damage limitation. Its clever pivoting feature enables you to replace the fuse easily, without taking everything apart or interfering with adjacent terminals. The holder simply rotates upward. The slim design means that they are space saving too. You can use these components with WMF 2.5 series, ideal when you want to reduce cabinet space but increase signal and wire options.

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 18 → 3 AWG
Number of Connectors 2
Colour Beige
Pitch 36mm
Fuse Size 10 x 38mm
Current Rating 32A
Voltage Rating 690 V
Termination Method Screw Down
Rail Type Compatibility TS35
Series W
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,00
(excl. BTW)
14,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 12,00
Related Products
DIN rail mounting component boxes with screw terminal ...
Description:
DIN rail mounting component boxes with screw terminal connections. A matrix type PCB is available, for each size box, with connections to all terminals. Typical applications include: PCB relays and associated circuitry, opto-isolators and other signal interfacing. The Standard size ...
DIN rail mounting component boxes with screw terminal ...
Description:
DIN rail mounting component boxes with screw terminal connections. A matrix type PCB is available, for each size box, with connections to all terminals. Typical applications include: PCB relays and associated circuitry, opto-isolators and other signal interfacing. The Standard size ...
2 P + E model, to French standards.For ...
Description:
2 P + E model, to French standards.For fitting onto omega type rails.The support allows for mounting of control and signalling accessories, with pre-drilled holes of 22.5 mm.
Select insulation housing a) with Faston type terminals ...
Description:
Select insulation housing a) with Faston type terminals for soldering (version 1) or b) with Faston type terminals for plug-in technology (version 2)Wire fixing: terminal screws M3.5Housing secured by: snap-on attachment on top-hat rails DIN EN 50 022 or screw ...