Fuse Terminal Block

  • RS-stocknr. 813-8881
  • Fabrikantnummer 1SNA199095R1300
  • Fabrikant Entrelec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Fused Terminals

Two versions of fused terminals
The latched, pull up fuse terminals are available for 1 1/4 in. x 1/4 in., BS1362 and 5x20mm/5x25mm fuses
The screw cap fused terminals are suited to 5x20mm fuses and is available with or without a neon (110-220V) indicator

Note

The fuseholder limits the rating to 250V/16A irrespective of markings on the terminals

Approvals

UL listed, CSA certified.

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569

Note

Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Specificaties
Kenmerk Waarde
Number of Levels Single
Cable CSA 10mm²
Colour Black
Pitch 13mm
Current Rating 16A
Voltage Rating 800 V ac
Termination Method Screw
Series SNA
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
5,872
(excl. BTW)
7,105
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 5,872
€ 29,36
*prijsindicatie
Related Products
Spring-loaded fuse terminals adopt the functional operation of ...
Description:
Spring-loaded fuse terminals adopt the functional operation of the fuse holder and potential distributionOptional fuse formats as version 5 x 20 mm (...HESI or ...HEDI) or blade fuse (...FSI/C)Optional indicator for signalling a tripped fusePolyamide insulating material corresponds to UL ...
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced ...
Description:
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ...
The STK fuse-disconnect terminals feature a compact shape ...
Description:
The STK fuse-disconnect terminals feature a compact shape so they take up minimal space. The hinged lever is used to hold the fuse and locks into its open position. Combi-foot snaps on to TS 35/TS 32 or mounting foot for ...
The SIK series fuse-disconnect terminals feature a hinged ...
Description:
The SIK series fuse-disconnect terminals feature a hinged lever that can be locked into its open position for supporting the micro-fuse. Combi-foot can snap on to TS 32/TS 35 railsConnection cross-section up to 10 mm2SIK 10 Z (872-5634) holds fuses ...