Weidmuller Fused DIN Rail Terminal, W Series, 36 V, 6.3A, Beige Single

  • RS-stocknr. 823-9571
  • Fabrikantnummer WTR 2.5/SI LD 36V -1763950000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

WTR Fuse Terminals

W-Series (WTR) fuse terminals.

Screw connection

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 26 → 12 AWG
Number of Connectors 2
Colour Beige
Pitch 5.1mm
Current Rating 6.3A
Voltage Rating 36 V
Termination Method Screw
Rail Type Compatibility TS35
Series W
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
104 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,49
(excl. BTW)
10,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 8,49
Related Products
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...