Panasonic Spur Gearbox, 100:1 Gear Ratio, 19.6 Nm Maximum Torque, 13.75rpm Maximum Speed

  • RS-stocknr. 423-945
  • Fabrikantnummer MY9G100B
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

60W 90x90mm Panasonic 3 Series Flange Mount Gearboxes

These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors.

Suitable for use with the following Panasonic 3 Series 60W motors: 424-162 and 424-156 (single phase), 424-015 and 424-005 (three phase)

Note

Panasonic 3 Series 60W and 90W Gearboxes can only be used with Panasonic 3 Series 60W and 90W Motors.

Panasonic 3 Series Motors and Gearboxes

Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors:

Grease-lubricated gearboxes
10000hr life
Quiet operation
Class B motor insulation

A number of additional design changes include:

A number of gearboxes with shorter gearheads
Different motor shafts (non-interchangeable with G Series gearboxes)

Note

Panasonic 3 Series Motors can only be used with Panasonic 3 Series Gearboxes.

Approvals

UL, CE and CCC

Specificaties
Kenmerk Waarde
Gear Ratio 100:1
Gearbox Type Spur
Maximum Output Torque 19.6 Nm
Shaft Diameter 15mm
Overall Length 90mm
Overall Width 90mm
Overall Depth 43mm
Maximum Speed 13.75rpm
Power Rating 60 W
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
236,90
(excl. BTW)
286,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 236,90
Related Products
A range of high quality steel geared gearboxes ...
Description:
A range of high quality steel geared gearboxes with the following features:. Maximum output 4NmMetal throughout for high reliability and performance and dissipation of heatSintered bronze bearingsMaximum radial load on output shaft 25NMaximum axial load on output shaft 20NMaximum continuous ...
Two types of L-Shaped right angle drive boxes. ...
Description:
Two types of L-Shaped right angle drive boxes. One has hardened steel gears and the other Acetal Homopolymer gears bonded to hardened steel shafts. Nylon housing has two counter-bored clearance holes for conventional chassis mounting and a tapped insert below ...
Low to medium power dc. motors fitted with ...
Description:
Low to medium power dc. motors fitted with a square mounting flange, centring bush and drive pinion. This allows simple and quick attachment to a 65mm square gearbox. All motors have sintered bronze bearings lubricated for life32mm diameter motors have ...
2 and 3 shaft right angle drive boxes ...
Description:
2 and 3 shaft right angle drive boxes with 1:1 and 2:1 speed ratios. Shafts are machined with keyways to DIN standardsAll gearboxes are supplied correctly filled lubricant retained by seals, which remain functional under normal operating conditions2 shaft version ...