Klinger Solid PTFE Gland & Valve Packing, 12.5 mm, 18m/s, 0 → 14 ph Range

  • RS-stocknr. 796-0726
  • Fabrikantnummer PAC00049001250008
  • Fabrikant Klinger
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Klinger K49 Series

Part of Klinger’s Topline product range. K49 has been designed as a multi-use compression packing capable of covering a broad range of applications helping to reduce the variety of gland packing that must be held in stock. Rapid heat dispersion enables this packing to be used in high speed systems where standard PTFE products would not be suitable. PTFE filaments have been impregnated with a graphite based lubricant. Suitable for a wide range of industries including water, distilleries, chemical processing, refineries and petrochemical plants. Useable with most media including strong acids and alkalis.

WRAS Approved for use with potable water.
Rapid Heat dissapation
Chemical reistant
Suitable for valve and pump packing

Note

Note: Packing should not be subjected to the maximums of temperature, pressure and speed simultaneously

Gland & Valve Packings

Gland and valve packings, designed to provide a seal between a moving spindle or shaft and the pressurised housing which it penetrates. Typical applications include rotary and reciprocating pumps, compressors, mixers or valve packing.

Specificaties
Kenmerk Waarde
Type Solid
Material PTFE
Size 12.5 mm
Rotary Speed 18m/s
Maximum Operating Pressure 20 bar, 200 bar, 250 bar
Maximum Operating Temperature +280°C
Minimum Operating Temperature -240°C
Maximum pH 14
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
389,74
(excl. BTW)
471,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 389,74
Related Products
Gland and valve packings, designed to provide a ...
Description:
Gland and valve packings, designed to provide a seal between a moving spindle or shaft and the pressurised housing which it penetrates. Typical applications include rotary and reciprocating pumps, compressors, mixers or valve packing. High performance valve and pump packing ...
A PTFE compression packing for valves and pumps ...
Description:
A PTFE compression packing for valves and pumps with excellent chemical resistance including strong acids and alkalis. K54F is a non-contaminating packing with a low coefficient of friction and is self lubricating. Suitable for a wide range of applications including ...
Manufactured from high strength aramid with added PTFE ...
Description:
Manufactured from high strength aramid with added PTFE to aid lubrication.Klinger K25 compression packings excellent dimensional stability and extrusion resistance make it ideal for high stress environments such as plunger pumps. Resistant to the abrasion caused by suspended solids and ...