GLS-SS Cable Switch with E-Stop, 100m, 2NO/2NC

  • RS-stocknr. 826-4117
  • Fabrikantnummer 144015
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM Guardian Line GLS-SS Stainless Steel Safety Rope Pull Switches

The Guardian Line GLS-SS from IDEM are safety rope pull switches with a stainless steel 316 housing able to withstand the tough environments found in the Food and Pharmaceutical industries. The fixing holes are under the cover of the switch to prevent food trap areas and can withstand chemical and detergent washdown due to all stainless steel parts and robust IP69K sealing by using integral bellows and gaskets.
They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 80m (260 feet) can be covered using only a single switch and safety spring
Upto 100m (328 feet) can be covered using two switches
Positive break contacts to IEC60947-5-1
Stainless steel 316 housing
IP69 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole 2NO / 2 NC

Note

826-4108 has an LED, 826-4117 has an E-stop, 826-4110 has LED and E-stop.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

CE, cULus, TUV.

IDEM Rope Pull Switch

The IDEM GLS-SS series emergency stop rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has stainless steel housing that protects short conveyor lengths of up to 100m and offers a choice of fittings depending on the application. This switch is designed to be mounted on machines and sections of conveyors, which cannot be protected by guards and unlike emergency stop pushbuttons, it can be activated from any point along the length of the rope pull to provide robust emergency stop protection. In combination with a dual-channel safety monitoring relay, this safety rope switch can be used as an emergency stop device and monitored. This product has a guardian line, which has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. This switch is mechanically latched and can only be returned to the operational condition by pressing the blue reset button.
This switch has an electrical current rating of 2.5A at a voltage rating of 250VAC/VDC.

Features and Benefits


Switch mechanism will latch the instant the safety contacts open
• Positive break contacts
• Rugged integral sealing bellows mean they can be high pressure hosed
• All internal screws are stainless steel
• Easy to wire with 3 x M20 conduit entries
• 4-pole 2NC/2NO
• Size of cable entry is M20

Certifications


IEC60947-5-1
• IEC60947-5-5
• EN954-1
• EN62061
• UL508
approved
• ISO 13850
• ISO 13849-1
• CE certified
• TUV certified
• IP69 rated
• IP67 rated

Specificaties
Kenmerk Waarde
Range Guardian Line
Series GLS-SS
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Maximum Rope Span 100m
Maximum Current 2.5 A
Maximum AC Voltage 250V ac
Maximum DC Voltage 250V
Housing Material 316 Stainless Steel
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
Minimum Operating Temperature -25°C
Dimensions 239 x 65 x 55 mm
Width 65mm
E-Stop Button Yes
Maximum Operating Temperature +80°C
IP Rating IP67, IP69K
Length 239mm
Depth 55mm
17 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
238,84
(excl. BTW)
289,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 238,84
Related Products
The Rittal TopTherm ’Blue e’ cooling unit is ...
Description:
The Rittal TopTherm ’Blue e’ cooling unit is a high-performance thermoelectric light-weight unit featuring an eco-mode control function for demand-orientated climate control. The unit utilises the Peltier effect to achieve high accuracy and low power consumption whilst minimising moving parts ...
EAO’s Series 45 unites an extremely broad range ...
Description:
EAO’s Series 45 unites an extremely broad range of machine operating functions with outstanding technical properties. In principle, the Series 45 is suitable for all sectors of industry. It is particularly useful wherever machinery may be exposed to exceptional external ...
E 90 series fuse-disconnectors are designed for connecting ...
Description:
E 90 series fuse-disconnectors are designed for connecting and disconnecting circuits under load, providing protection against short circuits and overloads. The case is made of self-extinguishing thermoplastic material resistant to high temperatures (all materials are UL listed) while the contact ...
Telemecanique Lesswire XZBW series wireless transmitters and receivers ...
Description:
Telemecanique Lesswire XZBW series wireless transmitters and receivers for use with a wide range of sensors. This range includes transmitters and receivers which communicate via 2.4 GHz radio transmission. Reduced cabling benefits applications where wiring or wire maintenance is not ...