GLS-Ex Cable Switch with E-Stop, Straight, 80m, 2NO/2NC

  • RS-stocknr. 826-4132
  • Fabrikantnummer 142030
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM Guardian Line Explosion Proof Safety Rope Pull Switches

The Guardian Line GLS-Ex and GLS-SS-Ex from IDEM are safety rope pull switches with ATEX EExd IIC T6 certified explosion proof contact blocks that conform to European harmonized standard EN60079-0 and EN60079-1 and can be used in European Zone 1, 2, 21, 22 environments (gas and dust). They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Designed for use in oil, petro-chemical, pharmaceutical, food processing and packaging applications where the potential for explosive atmospheres are present.

ATEX EExd IIC T6 Certified explosion proof contact blocks
Contact blocks conform to European harmonized standard EN60079-0 and EN60079-1
Can be used in European Zone 1, 2, 21, 22 environments (Gas and Dust)
Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 80m can be covered using one switch
Upto 100m can be covered using two switches
Positive break contacts to IEC60947-5-1

GLS-SS-Ex Rope Pulls

IP69K protection
Resistant to high pressure hosing at high temperature
Stainless steel 316 housing

GLS-Ex Rope Pulls

IP67 protection
Yellow painted diecast aluminium housing

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

IEC, IECEx, Ex, ATEX.

IDEM Rope Pull Switch

The IDEM GLS-Ex safety rope pull switch has 2NC/2NO contact configuration. It is designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons. This can be activated from any point along the length of the rope pull to provide robust emergency stop protection. In combination with a dual-channel safety-monitoring relay, this safety rope switch can be used as an emergency stop device and monitored. This product has a guardian line, which has a positive mechanical linkage between the switch contacts and the wire rope of 80m, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. This switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button. The switch has an electrical current rating of 2.5A at a voltage rating of 250VAC/VDC.

Features and Benefits


Explosion proof contact blocks
• Contact blocks conform to European harmonized standard
• Used in European Zone 1, 2, 21, 22 environments (Gas and dust)
• Switch mechanism will latch the instant the safety contacts open
• Yellow painted die cast aluminium housing
• Size of cable entries is M20

Applications


Oil
• Petrochemical
• Pharmaceutical
• Food processing
• Packaging

Certifications


IEC 60947-5-1
• IEC 60947-5-5
• EN 954-1
• EN 62061
• UL 508
• ISO 13850
• ISO 13849-1
• IP97 rated

Specificaties
Kenmerk Waarde
Range Guardian Line
Series GLS-Ex
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 80m
Maximum Current 2.5 A
Maximum AC Voltage 250V
Maximum DC Voltage 250V
Housing Material Die Cast Aluminium
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
Maximum Operating Temperature +80°C
Hazardous Area Certification ATEX
Width 63mm
Depth 54mm
Minimum Operating Temperature -25°C
Dimensions 239 x 63 x 54 mm
E-Stop Button Yes
IP Rating IP67
Length 239mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
280,14
(excl. BTW)
338,97
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 280,14
Related Products
Even under extreme conditions, such as major temperature ...
Description:
Even under extreme conditions, such as major temperature fluctuations, the SRM rope pull switch continues to work reliably. Rope pull switch manufactured in accordance with DIN EN 60947-5-5 and DIN EN ISO 13850Protection class IP67Stable and durable metal housing (aluminium ...
Plug-in relay - zelio rhn - instantaneous - ...
Description:
Plug-in relay - zelio rhn - instantaneous - 4 c/o - 125 v dc - 5 a. Maximum of 4 ContactsCurrent rating from 3A up to 30AWide choice of control voltageSeveral terminal types available: screw connector, screw clamp and spring/push-in ...
The Siemens 3SE2 series safety switch has a ...
Description:
The Siemens 3SE2 series safety switch has a 2NC/1NO contact configuration. It has conduit entry is M12 and size of cable entries is M20 x1.5. This has a glass fibre reinforced thermoplast enclosure. Simple, compact, IP65 door hinge safety switchAdditional ...
Suitable for interlocking small moveable guards (EN1088, EN60204, ...
Description:
Suitable for interlocking small moveable guards (EN1088, EN60204, EN292)2 positive opening contacts as standard, on guard opening1 N/C positive internal control contact operated by the solenoidKey operated lock to allow authorised override of solenoidSolenoid continuously rated 10VA, voltage limits -20 ...