4D Systems SK-gen4-43DCT-CLB-PI, Gen4 Diablo16 4.3in Capacitive Touch Screen Starter Kit for Raspberry Pi

  • RS-stocknr. 106-5297
  • Fabrikantnummer SK-gen4-43DCT-CLB-PI
  • Fabrikant 4D Systems
Wetgeving en compliance
Land van herkomst: CN

4.3 inch LCD Display Starter Kit for Raspberry Pi (gen4-uLCD-43DCT-CLB-PI)

The Starter Kit SK-gen4-43DCT-CLB-PI from 4 D Systems is designed for use with the Raspberry Pi (RS 896-8660). The Kit has a 4.3” display module with an integrated Diablo16 graphics controller it also comes with some hardware. The Gen4 module has a capacitive touch display and it enables you to explore the 4D Workshop4 environments and access all the features to assist the required application.

With the Designer environment you can use all the features of the display. The micro-SD card is used for displaying the images, video and sound. Data logging can be achieved via a programming cable or adapter letting you download compiled code and PmmC/Firmware updates. The ViSi and ViSi-Genie environments are similar and they are image-based which need a micro SD card as well as a programming cable. There is no micro SD card requirement or programming cable for the Serial environment once it is been configured as a Serial device. The micro SD card can be used though for storage or even changing to one of the other program environments.

The 4 D Systems Starter Kit for gen4-uLCD-43DCT-PI works with 4D Programming Cable, uUSB-PA5-II and 4D Arduino adapter Shield-II. The gen4-PA, gen4-IB and the 4D Serial Pi adapter are supplied in the kit along with other accessories.

In the box

Gen4 Integrated Display Module: gen4-uLCD-32DCT Display with capacitive touch with cover lens bezel
4D Serial Pi adapter
Gen4 Interface Module: gen4-IB
Gen4 Programming adapter: gen4-PA
4 GB micro SD Card
150 mm FFC Cable: 5-way female-to-female ribbon cable with male-to-male adapter
Quick Start Guide

Feature List
Display Size: 4.3”
Controller: Diablo16
Display Resolution: 480 x 272
Display Brightness: ∼450 nits
Backlight LEDs: 2 x 5
Touch: Capacitive with Cover Lens Bezel
Connector: 30 way FPC
Display Viewing Area (mm): 95.04 x 53.86
Module Dimensions (mm): 123.0 x 84.5 x 8.3
Operating Ambient Temperature: -15°C to +65°C
Storage Temperature: -30°C to +70°C

4D Systems gen4 LCD Display Modules

Kenmerk Waarde
Diagonal Display Size 4.3in
Display Technology Capacitive Touch Screen
Kit Classification Starter Kit
Kit Name Gen4 Diablo16
For Use With Raspberry Pi
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 127,52
10 +
€ 112,22
Related Products
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen ...
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1. Two interface adapters are also available. 4in TFT LCD touchscreen display panelResolution: 480 x 800 pixels (WVGA)16.7M ...
Adafruit PiTFT Plus is a 2.8 inch TFT ...
Adafruit PiTFT Plus is a 2.8 inch TFT display with Capacitive Touchscreen suitable for Raspberry Pi (Pi 3, Pi 2 includes Model A+, B).Note: Raspberry Pi computer and enclosure are not included. Features:2.8" display 320 x 240 16-bit colour pixelsScreen ...
The PiTFT Plus are a range of TFT LCD resistive touchscreens designed specifically to fit neatly onto the top of a Raspberry Pi.They are available with 3 screen sizes: 2.8, 3.2 and 3.5 inch. • Low power consumption, suitable for ...
The ME813A-WH50C module consists of a display controller ...
The ME813A-WH50C module consists of a display controller board based on the FT813 EVE device, built into a 5.0in WVGA LCD touchscreen display unit. 800 x 480pixel colour TFT LCD display with capacitive touch, up to 5 simultaneous pointsSupports portrait ...