Adafruit 2478, 2.4in Resistive Touch Screen Add On Board for Development Projects

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket

This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.

When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.

SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.

In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).

If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.

4 white LED backlight, transistor connected so you can use PWM to dim the backlight
4-wire resistive touchscreen
Screen Dimensions: 43 x 60 x 4 mm (1.7" x 2.4" x 0.16")
PCB Dimensions: 53 x 60 x 4 mm (2.1" x 2.4" x 0.16")
Weight: 30.5 g

Adafruit LCD Touchscreens

Specificaties
Kenmerk Waarde
Diagonal Display Size 2.4in
Display Technology Resistive Touch Screen
Kit Classification Add On Board
For Use With Development Projects
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
28,02
(excl. BTW)
33,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 28,02
Related Products
The CleO graphics display panel allows easy development ...
Description:
The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 ...
The CleO50 graphics display panel allows easy development ...
Description:
The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 5.0in 800 ...
The VM800B development modules provide a hi-quality display ...
Description:
The VM800B development modules provide a hi-quality display system in a bezel with a fitted LCD display and FT800 component board in a rugged, plastic enclosure. Offered in black or pearl colour, this display sub-system can shorten development time at ...
A basic touchscreen graphic monochrome LCD module. 128 ...
Description:
A basic touchscreen graphic monochrome LCD module. 128 x 64 pixel STN negative transmissive LCD display with touchscreenBlue backgroundWhite LED backlightStandard 8-bit parallel interfaceLogic power supply: 5VdcLCD power supply: 8.5Vdc.