Telic GSM & GPRS Module STD32

The STD32 is a telemetry device for alarming via SMS or E-mail and for switching output relays via call, SMS or the Internet. It offers two optocoupler inputs to monitor status information. In the event of an alarm, the STD32 will automatically send an SMS or E-mail to up to 5 recipients. The two relay outputs can either be activated with a free of charge call and/or via SMS or the Internet. The configuration of the STD32 telemetry module is done with a single phone call. All further configuration settings can be made by sending SMS messages to the device or by using the web-browser functionality. Additionally the STD32 now also offers a camera interface (accessory part). With the help of the Telic Camera (accessory) you can get digital pictures via E-mail in alarm situations or on request. Alternatively you can always retrieve a picture via the web interface.

Stand alone telemetry device
Quad-band technology
Control outputs with relays (6A at 230Vac max each)
Two digital inputs with alarm functionality
Bidirectional communication possible to control outputs and retrieve status information (via SMS or webbrowser)
Optocoupler inputs (+12V = "high", 10mA max) with alarm messages to be sent via SMS or e-mail
Power supply voltage 5-32V
Status LEDs for inputs and outputs as well as for GSM network
Ready to use due to standard configuration (only one phone call with a mobile needed)
Expert configuration allows setting of individual parameters (via SMS or webbrowser)

To be able to use the E-mail functionality your SIM card needs to have a GPRS subscription; to use the web-browser functionality the SIM Card needs to have a fixed IP address.

GSM/GPRS (Mobile Communications) - Modules