Leaded Gunmetal Rod, 13in x 7/8in OD

Wetgeving en compliance
Land van herkomst: GB

Leaded Gunmetal, (Cast Lead Bronze)

A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths

Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)

Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.


SAE 660; CuSn7Pb7Zn3 (ISO); BS 1400 LG4 (British); DIN 1705 Rg7 (German)

Kenmerk Waarde
Material Leaded Gunmetal
Form Rod
Length 13in
Outer Diameter 7/8in
Thermal Conductivity 33.6Btu
Width 7/8in
Density 0.322lb/in³
Suitability Bearings, Bushings, Gears, Piston Rings, Pumps
Hardness 65 HB
Height 7/8in
Tensile Strength 241 Mpa
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 52,47
3 - 5
€ 48,80
6 - 11
€ 46,18
12 +
€ 41,97
Related Products
The RS Pro range of Bronze rod and ...
The RS Pro range of Bronze rod and tubes, offer great machining qualities and a high degree of resistance to corrosion. Suitable for different types of applications. To BS1400: 1985: PBI ConcastProduced to nominal size + 1/32 in. plus toleranceHigh ...
The RS Pro range of Nickel Aluminium Bronze ...
The RS Pro range of Nickel Aluminium Bronze rod and tubes, offer a high level of Aluminium and Nickel making it a high strength option, while keeping the core Bronze properties of high wear, corrosion and ductility. Typical applications include ...