AS5162-HSOM ams, Hall Effect Sensor, 5V, 8-Pin SOIC

  • RS-stocknr. 102-4171
  • Fabrikantnummer AS5162-HSOM
  • Fabrikant ams
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

AS5162 12-Bit Magnetic Angle Position Sensor, ams AG

The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection.

360º contactless high-resolution angular position sensing
Programmable start and end point of the application region
Saw tooth mode 1 to 4 slopes per revolution
Large air gap, low-cost magnets
Increased durability

Position & Motion Sensors, ams AG

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Pin Count 8
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.9mm
Width 3.9mm
Height 1.25mm
Dimensions 4.9 x 3.9 x 1.25mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOIC
608 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
231 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,44
(excl. BTW)
10,21
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 8,44
25 - 99
€ 6,74
100 - 249
€ 5,40
250 - 499
€ 5,05
500 +
€ 4,60
Verpakkingsopties
Related Products
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
A linear output Hall Effect magnetic field sensor ...
Description:
A linear output Hall Effect magnetic field sensor from Taiwan Semiconductor. The device produces a ratiometric output voltage proportional to the applied magnetic flux density over a range of ±800 Gauss. Supply voltage: 3.0 to 6.5VSupply current: 2.2mA (typ)Bandwidth: 20kHzMagnetic ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...