AH372-P-B DiodesZetex,, Bipolar Hall Effect Sensor, 3-Pin SIP

  • RS-stocknr. 168-9567
  • Fabrikantnummer AH372-P-B
  • Fabrikant DiodesZetex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specificaties
Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -60 Gs
Maximum Magnetic Sensor Operating Point 60 Gs
Minimum Operating Supply Voltage 2.2 V
Maximum Operating Supply Voltage 20 V
Length 4.3mm
Width 1.6mm
Height 3.2mm
Dimensions 4.3 x 1.6 x 3.2mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 60 Gs
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 1000)
0,259
(excl. BTW)
0,313
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1000 +
€ 0,259
€ 259,00
*prijsindicatie
Related Products
High-performance 3-axis magnetometers operating at ultra-low-powerDigital output magnetic ...
Description:
High-performance 3-axis magnetometers operating at ultra-low-powerDigital output magnetic sensorDesigned to detect accurately the direction and magnitude of external magnetic fieldsAccurate compass heading for portable devices.
The GF705 magnetic field sensor from Sensitec is ...
Description:
The GF705 magnetic field sensor from Sensitec is based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity. With the GF705 sensor you are able to measure magnetic field ...
A range of MagnetoResistive FixPitch position sensors from ...
Description:
A range of MagnetoResistive FixPitch position sensors from Sensitec, available in a range of different pitches. Each position sensor incorporates two Wheatstone bridges on chip.The sensor outputs are proportional to sine and cosine of the coordinates measured. Each sensor is ...
Description:
The TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. Highly precise angle values are determined over ...