ACS712ELCTR-05B-T Allegro Microsystems,, Linear Hall Effect Sensor, 5V, 8-Pin SOIC

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems

Current sensing package with flip-chip technology
3000 Vrms galvanic isolation
High accuracy over temperature
Typical output error of 1%

Hall Effect Current Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 8
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.9mm
Width 3.9mm
Height 1.5mm
Dimensions 4.9 x 3.9 x 1.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOIC
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3000)
1,869
(excl. BTW)
2,261
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 1,869
€ 5.607,00
*prijsindicatie
Related Products
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...