A1104LLHLT-T Allegro Microsystems,, Unipolar Hall Effect Sensor Switch, 3-Pin SOT-23

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Unipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 50 Gs
Maximum Magnetic Sensor Operating Point 350 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 55 Gs
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3000)
1,051
(excl. BTW)
1,272
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 6000
€ 1,051
€ 3.153,00
9000 - 12000
€ 1,03
€ 3.090,00
15000 - 27000
€ 1,009
€ 3.027,00
30000 - 57000
€ 0,989
€ 2.967,00
60000 +
€ 0,969
€ 2.907,00
*prijsindicatie
Related Products
iNEMO inertial modules integrate complementary types of sensors ...
Description:
iNEMO inertial modules integrate complementary types of sensors to offer more compact, robust, and easy-to-assemble solutions compared to discrete MEMS products. iNEMO System-in-packages (SiP) combine accelerometer, gyroscope and magnetometer in a monolithic 6-axis or 9-axis solution. The integration of multiple ...
High-performance 3-axis magnetometers operating at ultra-low-powerDigital output magnetic ...
Description:
High-performance 3-axis magnetometers operating at ultra-low-powerDigital output magnetic sensorDesigned to detect accurately the direction and magnitude of external magnetic fieldsAccurate compass heading for portable devices.
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...