A1210ELHLT-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SOT-23

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

A1210/1/2/3/4 Continuous Time Hall Effect Latches, Allegro Microsystems

The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum voltage rating for automotive and industrial motor commutation applications.

All devices in the family are identical except for magnetic switchpoint levels.

Available in a SOT23W, low profile surface-mount package or a three-lead ultramini SIP for through-hole mounting.

AEC-Q100 automotive qualified
Continuous-time operation
Fast power-on time
Low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point -150 Gs
Maximum Magnetic Sensor Operating Point 150 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 155 Gs
110 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,664
(excl. BTW)
2,013
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 1,664
€ 8,32
25 - 95
€ 1,466
€ 7,33
100 - 245
€ 1,28
€ 6,40
250 - 495
€ 1,138
€ 5,69
500 +
€ 1,026
€ 5,13
*prijsindicatie
Verpakkingsopties
Related Products
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Bipolar Latch Hall IC detects polarity change for ...
Description:
Bipolar Latch Hall IC detects polarity change for S and N. The operation is more stable comparing to magnetic force detection (The duty on output pulse will be consistent). It is perfect fit as an interface to wheel key and ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...