ACS756SCB-050B-PFF-T Allegro Microsystems,, Linear Hall Effect Sensor, 5-Pin CA PFF

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems

Allegro Current sensor ICs in CA and CB packages
Conductor resistance of 100 μΩ typical for ultra low-power loss
Automotive grade options for harsh applications environments
3000 Vrms galvanic isolation

Hall Effect Current Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 5
Length 10mm
Width 13mm
Height 7mm
Dimensions 10 x 13 x 7mm
Minimum Operating Temperature -20 °C
Maximum Operating Temperature +85 °C
Package Type CA PFF
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
189 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,22
(excl. BTW)
8,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 7,22
25 - 99
€ 4,57
100 - 249
€ 3,93
250 - 499
€ 3,74
500 +
€ 3,65
Verpakkingsopties
Related Products
Allegro’s diverse selection of speed sensor ICs provide ...
Description:
Allegro’s diverse selection of speed sensor ICs provide optimized solutions for many non-automotive applications where speed or speed and direction information are needed. These sensor ICs can handle designs using various target geometries, materials, and sensing orientations. Allegro’s portfolio of ...
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide ...
Description:
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...