ADA4571BRZ Analog Devices, Hall Effect Sensor, 2.7 → 5.5 V, 8-Pin SOIC

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ADA4571BRZ, Anisotropic Magnetoresistive (AMR) Sensor, Analog Devices

Analog Devices ADA4571BRZ is an Anisotropic Magnetoresistive (AMR) Sensor with an integrated signal conditioning amplifiers and ADC drivers. This AMR sensor produces two analog outputs that show the angular position of the surrounding magnetic field.

Applications:
Absolute position measurement (linear and angle)
Brushless dc motor control and positioning
Actuator control and positioning
Contactless angular measurement and detection
Magnetic angular position sensing

Features
High precision 180° angle sensor
Maximum angular error of 0.5°
Analog sine and cosine outputs
Ratiometric output voltages
Low thermal and lifetime drift
SAR or Σ-Δ analog-to-digital converter (ADC) drive capable
Magnetoresistive (MR) bridge temperature compensation mode
Temperature range: −40°C to +150°C
EMI resistant
Fault diagnostics
VDD from 2.7 V to 5.5 V
Minimum phase delay
Qualified for automotive applications
Available in an 8-lead SOIC package

Magnetoresistive Sensors, Analog Devices

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Pin Count 8
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 5.5 V
Length 5mm
Width 4mm
Height 1.5mm
Dimensions 5 x 4 x 1.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOIC
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,89
(excl. BTW)
3,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 2,89
20 - 48
€ 2,60
49 +
€ 2,34
Verpakkingsopties
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...