TLE4905LE6433HAXA1 Infineon,, Unipolar Hall Effect Sensor, 3.8 → 24 V, 3-Pin SSOP

  • RS-stocknr. 919-8875
  • Fabrikantnummer TLE4905LE6433HAXA1
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specificaties
Kenmerk Waarde
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 17 mT
Maximum Magnetic Sensor Operating Point 19 mT
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 4.16mm
Width 1.52mm
Height 3.29mm
Dimensions 4.16 x 1.52 x 3.29mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SSOP
Typical Magnetic Sensor Hysteresis 6.5 (Maximum) mT
8000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Tape of 8000)
0,356
(excl. BTW)
0,431
(incl. BTW)
Aantal stuks
Per stuk
Per tape*
8000 - 16000
€ 0,356
€ 2.848,00
24000 +
€ 0,351
€ 2.808,00
*prijsindicatie
Related Products
Infineon linear Hall effect ICs are designed for ...
Description:
Infineon linear Hall effect ICs are designed for linear position detection and current measurement applications. The Hall effect sensors may include features such as a ratiometric analogue output. The sensors can be used for applications in linear and angular position ...
Integrated circuits utilising the Hall Effect to implement ...
Description:
Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum ...