Honeywell Ratiometric Hall Effect Sensor switching current 1 mA supply voltage 6.6 → 12.6 V dc

  • RS-stocknr. 189-5499
  • Fabrikantnummer SS94A2
  • Fabrikant Honeywell
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

LOHET IC’s

Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed.

Three-pin in-line PCB terminals, 0.1in spacing
Laser trimmed thin and thick film resistors
-40 to 125°C operating range

//media.rs-online.com/t_line/L650548-01.gif
//media.rs-online.com/t_line/LE650548-01.gif
//media.rs-online.com/t_line/LF650548-10.gif
//media.rs-online.com/t_line/LI650548-01.gif
Specificaties
Kenmerk Waarde
Output Type Ratiometric
Supply Voltage 6.6 → 12.6 V dc
Terminal Type PCB
Switching Current 1 mA
Length 7.62mm
Width 15.24mm
Depth 1.78mm
Dimensions 7.62 x 15.24 x 1.78 mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
812 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
51,33
(excl. BTW)
62,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 51,33
10 - 19
€ 49,55
20 +
€ 47,78
Related Products
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
Sensor for pneumatic cylindersRecords the ring magnets in ...
Description:
Sensor for pneumatic cylindersRecords the ring magnets in the cylinder pistonsPrecise recording of position by means of accurate switching pointsOutput: N/OOutput current max. 100 mAResponse threshold 2.1 mTTraverse speed > 10 m/sPolarity reversal protectionLED status displayConnection lead with plug ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...
The Cherry MP1014 series are digital hall effect ...
Description:
The Cherry MP1014 series are digital hall effect proximity sensors in low profile flange mount housing. Applications for these magnetic sensors include flow sensing, pedal switches and door position sensing. Capable of millions of operationsUnipolar switchingReverse battery protection to -24 ...