Assemtech PNP Hall Effect Sensor supply voltage 10 → 15 V dc

  • RS-stocknr. 361-5037
  • Fabrikantnummer S1478
  • Fabrikant Assemtech
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Nickel Plated Brass, M12

2 output styles; 5V logic (pull-down) or PNP+ NPN (N/O)
LED indication of alignment and diagnosis
Matching magnet assembly must be used
M12 thread
Cable length 300mm

Specificaties
Kenmerk Waarde
Output Type PNP
Supply Voltage 10 → 15 V dc
Terminal Type Wire Lead
Maximum Operating Temperature +70°C
Minimum Operating Temperature -30°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
49,23
(excl. BTW)
59,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 49,23
5 - 11
€ 47,72
12 +
€ 46,19
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
Sensor for pneumatic cylindersRecords the ring magnets in ...
Description:
Sensor for pneumatic cylindersRecords the ring magnets in the cylinder pistonsPrecise recording of position by means of accurate switching pointsOutput: N/OOutput current max. 100 mAResponse threshold 2.1 mTTraverse speed > 10 m/sPolarity reversal protectionLED status displayConnection lead with plug ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...