Cherry Hall Effect Sensor switching current 8 mA supply voltage 16 V dc

  • RS-stocknr. 765-9356
  • Fabrikantnummer AN820001
  • Fabrikant Cherry
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

AN8 Series Angular Position Sensors

The AN8 series of angular position sensors from Cherry are operated by a magnetic actuator near to the face of the sensor. These programmable magnetic position sensors are suitable for various applications including the replacement for smart bearings, pedal position sensors and throttle position sensors.

High tolerance for misalignment
Sensing up to 360 °
5 Vdc ratiometric device
No mechanical interface so no parts to wear out
Operating temperature range -40 → +125 °C

Specificaties
Kenmerk Waarde
Body Style Block
Mounting Style Flange Mount
Supply Voltage 16 V dc
Terminal Type Connector
Maximum DC Voltage 16V
Detection Range 0 180 °
Switching Current 8 mA
Length 57.33mm
Width 48.3mm
Depth 17.7mm
Dimensions 57.33 x 48.3 x 17.7 mm
Maximum Operating Temperature +125°C
Reverse Polarity Protection Yes
Minimum Operating Temperature -40°C
IP Rating IP67
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-09-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
43,42
(excl. BTW)
52,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 43,42
5 - 11
€ 42,13
12 +
€ 40,39
Related Products
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall-effect sensor for detecting the proximity of a ...
Description:
Hall-effect sensor for detecting the proximity of a magnetic field.The magnetic field may be generated either by a permanent magnet or by an electromagnetic field.Robust aluminium threaded cylindrical housing that can be easily integrated into a tapped hole.Digital output with ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...