IP68S Hall Effect Thumbwheel 10mA Thumbwheel Through Hole Linear, -40 → +85°C, 4.5 → 5.5 V dc

  • RS-stocknr. 737-3762
  • Fabrikantnummer HTWM-1A12A22
  • Fabrikant Otto
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Otto HTWM Series - Hall Effect Thumbwheel

The HTWM offers the same performance as the HTW proportional thumbwheel but with a much shorter behind panel depth. Available with four output options, the HTWM offers a self-centre, single axis thumbwheel actuator that provides linear change in voltage output in either direction from centre. Options include increasing or decreasing voltage output from the centre position to the full travel position, and single or dual (redundant) outputs per axis. The HTWM offers snap-in style mounting and a 3 million cycle rotational life. The HTWM electronics are sealed to IP68S and have excellent EMI/RFI immunity ideal for use in grip, armrest and panel applications.

Hall Effect contact-less sensing technology
Self-centre single axis actuator
Rocker switch style mounting, snaps into 34.03 x 17.78mm panel cut-out
Behind panel depth: 24mm
Operating force: 0.5lb
Black bezel and wheel
IP68 sealed
Excellent EMI/RFI immunity
Pre-wired versions are terminated with 450mm long 18AWG wires with stripped ends
Pin versions are terminated with 0.635mm square pins

Specificaties
Kenmerk Waarde
Minimum Supply Voltage 4.5V dc
Maximum Supply Voltage 5.5V dc
Supply Current 10mA
Switch Life 3000000Cycles
Actuator Type Thumbwheel
Terminal Type Through Hole
Output Type Linear
IP Rating IP68S
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Supply Voltage Range 4.5 → 5.5 V dc
Operating Temperature Range -40 → +85°C
36 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
96,21
(excl. BTW)
116,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 96,21
5 - 19
€ 91,40
20 - 49
€ 86,59
50 - 99
€ 81,76
100 +
€ 76,98
Related Products
Momentary pushbutton switches, utilising Hall Effect sensor technology, ...
Description:
Momentary pushbutton switches, utilising Hall Effect sensor technology, for long life contactless switching and designed to withstand harsh environments. Ideally suited to applications requiring repeated 'jogging', or where continuous positioning of the load is critical. Typical applications include material ...
Suregrip SM2 series of slider switches provide a ...
Description:
Suregrip SM2 series of slider switches provide a proportional hall effect module offered in three configurations. The SM2 series are a sealed IP67 rated module, making them suitable for use within more demanding environments & external installation. +/- 24° travelIP67 ...
Single axis Hall Effect slider modules from Suregrip ...
Description:
Single axis Hall Effect slider modules from Suregrip available in three configurations: Friction maintained, proportional (spring return to centre) and detented (on-off-on).The friction maintained version is suitable for throttle control or general machine speed control. The proportional version is designed ...
The CH Products HFX Series 1 joystick is ...
Description:
The CH Products HFX Series 1 joystick is a contactless, multi-axis controller providing long life fingertip positioning control. A compact, low profile joystick utilizing non-contact Hall effect technology, the HFX Series 1 joystick is designed for low operating force, clean ...