RS PRO Harsh Environment Wire 0.5 mm² CSA, Red 25m Reel

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Harsh Environment Wire - Silicone Rubber

Brought to you by RS PRO, Tinned copper conductors covered with 0.8 mm wall thickness silicone rubber to BS 6195 table 4. These cables will satisfy a wide number of applications related to medical, electronic or electrical equipment which may be operated in environmental conditions. Perfect in situations where ozone, corona discharge, radiation, heat, weathering or the normally adverse effects of a wide range of oils, solvents, etc, may be encountered. All models are highly reliable and excellent quality.

Features and Benefits

• Tinned Copper
• Silicone rubber insulation
• Various wire sizes
• 0.8 mm wall thickness

What is harsh environment wire?

Defined by its name, harsh environment wire is cable suitable for less than friendly environments. Typically used as hook up wire, each reel performs to an optimum level within harsher areas. High temperature can be a massive threat in terms of electronics, causing all kinds of health and safety risks. These RS PRO cables provide excellent resistance to such problems.

Where is harsh environment wire used?

Any electronic devices situated within harsh environments would benefit from this type of wire. Laboratories would be be a good example, as they are areas which could have toxic and potentially damaging gasses that interfere with wires. As as example, some areas using these cables would be:

• Construction sites
• Car engines
• Aeroplanes
• Petrol stations

Approvals

7777

Standards

BS 6195 table 4 type 5

Specificaties
Kenmerk Waarde
Cross Sectional Area 0.5 mm²
Sheath Colour Red
Wire Style BS6195
American Wire Gauge 20 AWG
Insulation Material Silicone Rubber
Resistant To Corona Discharge, Heat, Oils, Ozone, Radiation, Solvents, Weathering
Core Strands 16/0.2 mm
Minimum Operating Temperature -60°C
Maximum Operating Temperature +180°C
Operating Temperature Range -60 → +180 °C
Length 25m
Outer Diameter 2.6mm
Voltage Rating 750 V
Cable Shape Single Core
Number of Strands 16
Insulation Wall Thickness 0.8mm
Conductor Material Bare Copper
Size of Strands 0.2 mm
97 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Reel of 25 Metre(s)
13,01
(excl. BTW)
15,74
(incl. BTW)
Reel(s)
Per reel
Per meter*
1 - 4
€ 13,01
€ 0,52
5 - 9
€ 12,36
€ 0,494
10 - 19
€ 11,71
€ 0,468
20 +
€ 11,06
€ 0,442
*prijsindicatie
Related Products
The M22759 wire is ideal for use with ...
Description:
The M22759 wire is ideal for use with a wide range of commercial and military aerospace or ground system applications. Its particular role can make this wire perfect for harsh environments. The airframe version has a dual layer insulation. • ...
100G wire features a dual wall insulation layer ...
Description:
100G wire features a dual wall insulation layer manufactured from a TE formulated blend of polymers over tin plated copper conductors. It is designed to meet the requirements of VG95218-20 Type-E while still being lightweight, flexible and resistant to recoil ...
FlexLite HT wire with a tough, high temperature ...
Description:
FlexLite HT wire with a tough, high temperature insulation recommended for lighting, appliance, electrical and motor applications.FlexLite HT products provide wiring solutions like many fluoropolymers, such as PTFE and FEP. FlexLite HT is not prone to cold flow problems high ...
Type 99M® has a dual wall construction of ...
Description:
Type 99M® has a dual wall construction of irradiated modified polyester. Designed to meet stringent low hazardous performance, in particular naval, mass transit and industrial control panel wiring. Features & Benefits• Low flammability• Low smoke generation• Low toxicity index• Small ...