ATEX 220-240V LED Emergency Fitting

  • RS-stocknr. 173-5622
  • Fabrikantnummer XEL4001VA-00000
  • Fabrikant DTS
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

DTS XEL Emergency Light Fitting

The DTS XEL emergency light fitting device is an ideal lighting device for the most challenging and harsh environments. Use of LED technology has a number of advantages over the conventional lighting technology, like decreased power consumption and thus cost savings on electricity bills, increased life expectancy and more. Its highly advanced protection and tolerance features make it suitable for effectively dealing with the modern-day industrial challenges and requirements. The LED has a light output up to 5,000lm. It has a lifespan of about 800,000 hours.

Features and Benefits

• 1 to 3 hours of battery life
• It performs two functions of lighting and signage
• Equipped with one cable gland and a plug
• Tough glass diffuser for increased safety
• Three wires type wiring configuration
• Gas zone 1, 2, 21 and 22 protection

Applications

• Chemical Sites
• Refineries
• Docks and Jetties
• Offshore
• Marine Engineering
• Pharmaceutical
• Paint Spray Shops
• Paper Mills
• Waste, Water and Metal Treatment Plants

Certifications

• ATEX certified
• IP66 rated

Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
RS PRO IP65 LED surface mounted, non-corrosive fitting ...
Description:
RS PRO IP65 LED surface mounted, non-corrosive fitting features ABS base, polycarbonate controller, stainless steel clips and is supplied with suspension eyes and stainless steel mounting bracket. The lighting fitting consumes up to 40% less energy than traditional light fittings, ...
The Sylvania Hydroproof T8 electronic / switch start ...
Description:
The Sylvania Hydroproof T8 electronic / switch start range of IP67 anti-corrosive / corrosion resistant luminaires are designed for the most challenging environments and offer unequalled chemical resistance. Body made from extremely resistant glass-reinforced polyester (SMC)Flat upper surface to help ...
Easy adjustment of sensor range, daylight detection and ...
Description:
Easy adjustment of sensor range, daylight detection and hold timeHigh luminous efficacyEnergy savings of up to 55 % compared to luminaires that use CFLEasy and quick installationVery homogenous lightClear cover protects the reflector against dust and contact3 years ... frequency ...
Slim profileResistance against vandalismHigh luminous efficacyVery homogenous lightLED ...
Description:
Slim profileResistance against vandalismHigh luminous efficacyVery homogenous lightLED protected for safe installation5 years ... areasBeam angle: 120°Type of protection: IP65Impact resistance: IK10Housing and cover made from polycarbonateGlow Wire Test according to IEC 60695-2-12: 850 °CThrough-wiring possible.