28.4 W, LED Module Hazardous Area Light Fitting, 1, LED, Temp T4, 240 V

  • RS-stocknr. 175-0599
  • Fabrikantnummer 9LED2700
  • Fabrikant Petrel
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Petrel LED Module Hazardous Area Light Fittings

The Petrel LED hazardous area light fitting works on 230V voltage rating and is available in standard and emergency variants for hazardous area. It is available in sizes of 2ft to 5ft and light output of 2, 297lm. It is designed for maximum light output and energy efficient control equipment. The LED is made from anodised corrosion resistant aluminium body with high impact polycarbonate tube.

Features and Benefits

• Low maintenance and high efficiency
• Robust and long-lasting light
• Electric power consumption of 28.4W
• Captive diffuser with isolation switch for safety installation and maintenance
• Reduced energy costs with motion sensor option
• Stainless steel brackets and available in 3 lengths
• Gas zone 1, 2 and 22 protection

Applications

• Chemical sites and refineries
• Docks and Jetties
• Pharmaceutical and waste, water and metal treatment plants
• Hazardous and industrial areas

Certifications

• CML 16ATEX3397X
• IECEx CML 16.0149X
• IP65 to EN60529

Specificaties
Kenmerk Waarde
Type LED Module
Zone Classification 1
Temperature Classification T4
Wattage 28.4 W
Lamp Type LED
Voltage Rating 240 V
Length 760 mm
Width 193 mm
Individual Lamp Wattage 28.4W
Number of Lamps 1
Hazardous Area Certification IECEx
Series 9
Current Rating 25 A
4 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
715,00
(excl. BTW)
865,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 715,00
Related Products
Easy adjustment of sensor range, daylight detection and ...
Description:
Easy adjustment of sensor range, daylight detection and hold timeHigh luminous efficacyEnergy savings of up to 55 % compared to luminaires that use CFLEasy and quick installationVery homogenous lightClear cover protects the reflector against dust and contact3 years ... frequency ...
Floodlight- 105W LED - wide beam - with ...
Description:
Floodlight- 105W LED - wide beam - with galvanised steel flat mounting bracket - electronic converter 100-254Vac 50-60Hz - Offshore grade yellow paint RAL 1003 - includes - one nickel-plated brass M20 cable gland for non-armoured cable diameter 10-16mm and ...
Tubular LED fixture - Glass tube - 59W ...
Description:
Tubular LED fixture - Glass tube - 59W - universal electronic driver 100-254V 50-60Hz and LED module - Offshore grade yellow paint RAL 1003 - includes - one 3/4 NPT nickel plated brass cable gland for non-armoured cable diameter 6-12 ...
LED fixture, 5 wire loop - 22W - ...
Description:
LED fixture, 5 wire loop - 22W - universal electronic driver 100-254V 50-60Hz and LED module - includes - one nylon M20 cable gland diam 6 - 12mm, two M20 nylon stopping plugs and two zinc-plated steel brackets for ceiling ...