Eaton 2 x 18 W Light Fitting Hazardous Area Light, 1, 2, Twin Fluorescent, Temp T4, 120 → 240 V ac, ATEX
- RS-stocknr.:
- 327-2573
- Fabrikantnummer:
- 12265875111
- Fabrikant:
- Eaton
5 op voorraad - levertijd is 4 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 644,51
(excl. BTW)
€ 779,86
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 644,51 |
- RS-stocknr.:
- 327-2573
- Fabrikantnummer:
- 12265875111
- Fabrikant:
- Eaton
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Eaton CEAG Hazardous Area Linear Fluorescent Light Fitting - Zone 1 & 2 Ex-e Lighting
The Eaton CEAG Crouse-Hinds eLLK 92 range of linear luminaires for fluorescent lamps combine the latest lighting technology with the requirements of a harsh and hazardous environment. These explosion-proof hazardous area lights are designed with safety in mind and can be easily connected to a CEAG emergency lighting supply system. This hazardous area lighting provides illumination and excellent light output in areas where other light sources would be unsuitable.
Features and Benefits
Uses twin T8 linear fluorescent tubes
Easy installation and maintenance
Explosion protected and suitable for hazardous area lighting in offshore and industrial environments (zone 1 and zone 2)
Hinged access to the terminal compartment with 6mm terminals at both ends allowing through wiring
Integral switch isolates the lamps when cover is removed
High-frequency electronic ballast
Smooth outer surface for easier cleaning
Lightweight polycarbonate and GRP housing
IP66 ingress of protection meaning this light is dust tight and protected from water vapour jets
Easy installation and maintenance
Explosion protected and suitable for hazardous area lighting in offshore and industrial environments (zone 1 and zone 2)
Hinged access to the terminal compartment with 6mm terminals at both ends allowing through wiring
Integral switch isolates the lamps when cover is removed
High-frequency electronic ballast
Smooth outer surface for easier cleaning
Lightweight polycarbonate and GRP housing
IP66 ingress of protection meaning this light is dust tight and protected from water vapour jets
Certificate No.
PTB 96 ATEX 2144
Group and Category
II 2 G EX eds IIC T4 for Zones 1 & 2
Eaton CEAG Twin Fluorescent Hazardous Area Light, 18W, 180mA - 12265875111
Illuminate hazardous areas in your workplace with this durable area light from Eaton CEAG. The unit features two energy-efficient 18W light-emitting diode (LED) lamps that are designed to deliver plenty of light with minimal power consumption.
The lamps are shielded by a housing made of polycarbonate and glass-reinforced polyester (GRP) material. This isn't just impact-resistant, it's also able to withstand explosions. You can use this unit in marine and industrial environments, where it can be connected to an emergency lighting supply source.
The lamps are shielded by a housing made of polycarbonate and glass-reinforced polyester (GRP) material. This isn't just impact-resistant, it's also able to withstand explosions. You can use this unit in marine and industrial environments, where it can be connected to an emergency lighting supply source.
Features & Benefits
• Smooth outer surface for easy cleaning
• Integral switch isolates the lamp when its cover is removed for improved electrical safety
• A standard dual ballast is included for current regulation and energy efficiency
• IP66 (ingress protection) rating indicates resistance to dust and high-pressure water jets
• Current rating of 180mA for energy conservation
• Integral switch isolates the lamp when its cover is removed for improved electrical safety
• A standard dual ballast is included for current regulation and energy efficiency
• IP66 (ingress protection) rating indicates resistance to dust and high-pressure water jets
• Current rating of 180mA for energy conservation
How do I mount this component?
This area light is designed for ceiling mounting. It has a protective bowl that can be screwed in on both sides so you can mount it on either axis. Single-ended through wiring allows for simple installation.
Note
Eaton formerly known as CEAG
Approvals
Group & Category: II 2 G EX eds IIC T4 for Zones 1 & 2
Certificate No. PTB 96 ATEX 2144
Certificate No. PTB 96 ATEX 2144
Specificaties
Kenmerk | Waarde |
---|---|
Type | Light Fitting |
Zone Classification | 1, 2 |
Temperature Classification | T4 |
Wattage | 2 x 18 W |
Lamp Type | Twin Fluorescent |
Voltage Rating | 120 → 240 V ac |
Lamp Size | T8 |
Length | 760 mm |
Width | 188 mm |
Individual Lamp Wattage | 18W |
Number of Lamps | 2 |
Hazardous Area Certification | ATEX |
Standards Met | CSA |
Current Rating | 180 mA |