400 W, Bulkhead Light Fitting, Floodlight, Temp T1, T2, T3, T4, T5

  • RS-stocknr. 781-2594
  • Fabrikantnummer XSF400P
  • Fabrikant DTS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Ex de XF Floodlight

The XF Series of hazardous area Ex d Floodlight fitting from DTS has a robust design and is ideal for many hazardous areas, whether it is oil, gas or marine. The XF ATEX Floodlights come with a variety of fixings, allowing them to be mounted onto many types of structures, including poles. This range of floodlights is available with a choice of HP Sodium or Metal Halide lamps.

Floodlight with galvanised steel flat mounting bracket
Compact, lightweight and robust
Ferromagnetic ballast 220 V 60 Hz
Manufactured to be Ex d but has Ex e integral junction box for easy installation
Excellent photometric properties, wide or narrow beam
Internationally recognised
Supplied with lamp installed and cable gland

Approvals

LCIE 00 ATEX 6019X
IECEx LCI 11-0062X
Ex II 2 G
Ex de IIB T3 Gb for ≤ -20°C to ≤ +40°C
Ex de IIB T2 Gb for ≤ -20°C to ≤ +60°C
IEC 60529 (2001) IP66

Supplied with

Lamp installed, one nickel-plated brass M20 stopping plug and one cable gland M20 for non armoured cable (10-16mm)

Specificaties
Kenmerk Waarde
Type Bulkhead
Temperature Classification T1, T2, T3, T4, T5
Wattage 400 W
Lamp Type Floodlight
Anti-corrosive Yes
Individual Lamp Wattage 400W
Number of Lamps 1
Hazardous Area Certification ATEX
10 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
1.016,78
(excl. BTW)
1.230,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.016,78
Related Products
Cost effective for continuous operationSingle or dual 9W ...
Description:
Cost effective for continuous operationSingle or dual 9W PL lamp versionsLow heat generation and long lifeAluminium body with clear polycarbonate lens 20mm conduit knockouts for side and bottom cable entry.
Body and frame in strong pressure die-cast LM6M ...
Description:
Body and frame in strong pressure die-cast LM6M highly corrosion resistant aluminiumTextured black full polyester powder finishCover frame retained on two stainless steel safety chainsPrismatic polycarbonate lensFixings outside gasket line to preserve IP ratingAluminium gear tray with LED bar60,000 hour ...
Strong pressure die-cast LM24 aluminium bodyTextured black, full ...
Description:
Strong pressure die-cast LM24 aluminium bodyTextured black, full polyester powder finish as standardHinged satin flame-retardant polycarbonate coverTamper-resistant cover screws as standardBezel trim for semi-recessed mounting60,000 hour LED life expectancyFitted with 4000K LEDs.
The Thorlux REALTA high performance LED luminaire is ...
Description:
The Thorlux REALTA high performance LED luminaire is designed to minimise light pollution and energy consumption. Fitted with 5000K high performance light bar LEDsGraphite full polyester powder finishStrong die-cast LM2 aluminium bodyHigh efficiency prismatic polycarbonate front refractorHighly specular, ...