TE Connectivity Straight 202K1 Black, LFH Polyolefin Adhesive Backing, 43 mm
- RS-stocknr.:
- 718-2897P
- Fabrikantnummer:
- 202K163-100/86-0
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Subtotaal 15 eenheden (geleverd in een zak)*
€ 500,55
(excl. BTW)
€ 605,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 187 stuk(s) vanaf 19 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 15 - 49 | € 33,37 |
| 50 + | € 32,46 |
*prijsindicatie
- RS-stocknr.:
- 718-2897P
- Fabrikantnummer:
- 202K163-100/86-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Product Type | Heat Shrink Boot | |
| Sub Type | Straight | |
| Material | LFH Polyolefin | |
| Number of Breakouts | 1 | |
| Shrink Temperature | 100°C | |
| Colour | Black | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 105°C | |
| Maximum Shrunk Diameter | 28.2mm | |
| Minimum Inside Diameter | 25mm | |
| Minimum Shrunk Diameter | 9.9mm | |
| Maximum Inside Diameter | 43mm | |
| Standards/Approvals | RoHS | |
| Series | 202K1 | |
| Adhesive Backing | Yes | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Product Type Heat Shrink Boot | ||
Sub Type Straight | ||
Material LFH Polyolefin | ||
Number of Breakouts 1 | ||
Shrink Temperature 100°C | ||
Colour Black | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 105°C | ||
Maximum Shrunk Diameter 28.2mm | ||
Minimum Inside Diameter 25mm | ||
Minimum Shrunk Diameter 9.9mm | ||
Maximum Inside Diameter 43mm | ||
Standards/Approvals RoHS | ||
Series 202K1 | ||
Adhesive Backing Yes | ||
- Moulded Boot Straight size 63
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Zero Halogen (Lipped) - 202K1 and 222K1 Series
Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.
Features and benefits
• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m
Note
If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots
Standards
DEF STAN 59/97 issue 3 Type DF