TE Connectivity Right Angle 222K1 Black, Fluid Resistant Elastomer, 31 mm
- RS-stocknr.:
- 718-2985P
- Fabrikantnummer:
- 222K142-25-0
- Fabrikant:
- TE Connectivity
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 718-2985P
- Fabrikantnummer:
- 222K142-25-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Product Type | Heat Shrink Boot | |
| Sub Type | Right Angle | |
| Material | Fluid Resistant Elastomer | |
| Number of Breakouts | 1 | |
| Colour | Black | |
| Minimum Operating Temperature | -75°C | |
| Maximum Operating Temperature | 150°C | |
| Maximum Inside Diameter | 31mm | |
| Maximum Shrunk Diameter | 18mm | |
| Minimum Shrunk Diameter | 7.1mm | |
| Minimum Inside Diameter | 31mm | |
| Standards/Approvals | No | |
| Adhesive Backing | No | |
| Series | 222K1 | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Product Type Heat Shrink Boot | ||
Sub Type Right Angle | ||
Material Fluid Resistant Elastomer | ||
Number of Breakouts 1 | ||
Colour Black | ||
Minimum Operating Temperature -75°C | ||
Maximum Operating Temperature 150°C | ||
Maximum Inside Diameter 31mm | ||
Maximum Shrunk Diameter 18mm | ||
Minimum Shrunk Diameter 7.1mm | ||
Minimum Inside Diameter 31mm | ||
Standards/Approvals No | ||
Adhesive Backing No | ||
Series 222K1 | ||
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.