TE Connectivity Straight 202K1 Black, Fluid Resistant Elastomer, 24 mm
- RS-stocknr.:
- 718-3098P
- Fabrikantnummer:
- 202K121-25-01-0
- Fabrikant:
- TE Connectivity
Subtotaal 1 eenheid (geleverd in een zak)*
€ 27,91
(excl. BTW)
€ 33,77
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 2 stuk(s) vanaf 06 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 27,91 |
*prijsindicatie
- RS-stocknr.:
- 718-3098P
- Fabrikantnummer:
- 202K121-25-01-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Product Type | Heat Shrink Boot | |
| Sub Type | Straight | |
| Material | Fluid Resistant Elastomer | |
| Number of Breakouts | 1 | |
| Shrink Temperature | 90°C | |
| Colour | Black | |
| Minimum Operating Temperature | -75°C | |
| Maximum Operating Temperature | 150°C | |
| Minimum Inside Diameter | 24mm | |
| Maximum Inside Diameter | 24mm | |
| Maximum Shrunk Diameter | 10.4mm | |
| Minimum Shrunk Diameter | 5.6mm | |
| Standards/Approvals | RoHS | |
| Adhesive Backing | No | |
| Series | 202K1 | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Product Type Heat Shrink Boot | ||
Sub Type Straight | ||
Material Fluid Resistant Elastomer | ||
Number of Breakouts 1 | ||
Shrink Temperature 90°C | ||
Colour Black | ||
Minimum Operating Temperature -75°C | ||
Maximum Operating Temperature 150°C | ||
Minimum Inside Diameter 24mm | ||
Maximum Inside Diameter 24mm | ||
Maximum Shrunk Diameter 10.4mm | ||
Minimum Shrunk Diameter 5.6mm | ||
Standards/Approvals RoHS | ||
Adhesive Backing No | ||
Series 202K1 | ||
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.