- RS-stocknr.:
- 639-3522
- Fabrikantnummer:
- 319-00600 TREDUX-6/2-PO-X-BK
- Fabrikant:
- HellermannTyton
- RS-stocknr.:
- 639-3522
- Fabrikantnummer:
- 319-00600 TREDUX-6/2-PO-X-BK
- Fabrikant:
- HellermannTyton
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Tredux Heat-Shrink Tubing, Thin-Walled
TREDUX thin wall heat shrink tubing is used for general electrical insulation and mechanical protection of cables and wires. It is suitable for use in the solar energy, wind energy, electronics, shipbuilding, and defence sectors.
Features and Benefits
Thin walled flexible heat-shrink tubing
Reliable electrical insulation
Voltage range 600V
Mechanical protection of cables and wires
Cross-linked polyolefin
Heatshrink ratio 3:1
Easy quick installation using torch or heat gun
500% elongations at break
Reliable electrical insulation
Voltage range 600V
Mechanical protection of cables and wires
Cross-linked polyolefin
Heatshrink ratio 3:1
Easy quick installation using torch or heat gun
500% elongations at break
Why should I use TREDUX Heat-shrink tubing?
The shrink 3:1 ratio conforms to highly variable substrates and replaces many different sized tubing solutions by fitting almost any heat shrink task. It is also usable for a wide variety of industries making it very versatile.
What does a heat shrink ratio of 3:1 mean?
A ratio of 3:1 means when the tube is heated it shrinks to a third of its original diameter.
How can I shrink the tubing?
A heat gun or a heat shrink oven are ideal ways to shrink your tubing. Before heating always check to ensure you know the correct heating temperature of your tubing.
Remember to ensure all health and safety precautions have been taken prior to using a heating devise.
The shrink 3:1 ratio conforms to highly variable substrates and replaces many different sized tubing solutions by fitting almost any heat shrink task. It is also usable for a wide variety of industries making it very versatile.
What does a heat shrink ratio of 3:1 mean?
A ratio of 3:1 means when the tube is heated it shrinks to a third of its original diameter.
How can I shrink the tubing?
A heat gun or a heat shrink oven are ideal ways to shrink your tubing. Before heating always check to ensure you know the correct heating temperature of your tubing.
Remember to ensure all health and safety precautions have been taken prior to using a heating devise.
Contents
1
Specificaties
Kenmerk | Waarde |
---|---|
Sleeve Diameter | 6mm |
Colour | Black |
Shrunk Diameter | 2mm |
Sleeve Type | Heat Shrink |
Adhesive Lined | No |
Shrink Ratio | 3:1 |
Sleeve Length | 1m |
Material | Cross Linked Polyolefin |
Operating Temperature Range | -55 → +135 °C |
Flame Retardant | Yes |
Series | TREDUX |