Glenair Black Heat Shrink Boot 17mm Sleeve Dia. x 20mm Length , Series 77 Series

  • RS-stocknr. 742-2599
  • Fabrikantnummer 770-005A102R
  • Fabrikant Glenair
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Glenair Heat Shrink Boots, Lipless, Right Angle, Type 1, Series 77

Glenair full nelson lipless right angle heatshrink boots, series 77 type 1 are semi rigid high performance elastomer boots with excellent resistance to fuels, oils and various solvents with superior high temperature performance rated for 3000 hours use at +150 deg C. Typical applications for these elastomer heat shrink boots include military vehicles and petrol chemical exploration. Available pre-coated with R epoxy adhesive (R part number designation) or adhesive free.

Temperature range -75 to +150 °C
Excellent resistance to fuels, oils, solvents and heat

Approvals

VG95343 Type 6, BSG 198-5-DE, EN62329-102, SAE AS5258 Type H

Glenair Heat Shrink Boots Full Nelson Series 77

Glenair Series 77 full nelson heat shrink boots provide mechanical and environmental protection to connector - cable transistions. Suitable for many applications including military vehicles, shipboard and petrochemical exploration. These durable heat shrink boots are available in semi rigid elastomer (type 1) and polyolefin ( type 2 smoke and halogen free) material types with or without epoxy R adhesive lining.

Specificaties
Kenmerk Waarde
Sleeve Diameter 17mm
Shrunk Diameter 8mm
Colour Black
Sleeve Type Heat Shrink
Adhesive Lined Yes
Sleeve Length 20 mm
Material Elastomer
Flame Retardant Yes
Series Series 77
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,51
(excl. BTW)
26,03
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,51
5 - 24
€ 21,08
25 - 49
€ 20,54
50 - 99
€ 19,90
100 +
€ 19,14
Related Products
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
The TE Connectivity 15mm inner diameter black cable ...
Description:
The TE Connectivity 15mm inner diameter black cable boot is heat shrinkable moulded part that provides lightweight screening and protection. It is a high-performance and reliable product that offers enhanced EMI performance. It offers screening capability with 70db attenuation up ...
General purpose Y-Shaped heat shrink moulded parts. These ...
Description:
General purpose Y-Shaped heat shrink moulded parts. These heat shrink boots provide strain relief and protection on cable harnesses. • Y-Shape transition• Good resistance to aggressive chemicals at high temperature• Manufactured from fluid resistant elastomer• Available with 2, 3 or ...
Heat shrinkable boots providing a watertight seal and ...
Description:
Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications. Flame retardantAdhesive sealant replaces tapes, epoxies and greaseReliable sealing on cable jackets and on ...