Glenair Black Heat Shrink Boot 36mm Sleeve Dia. x 80mm Length , Series 77 Series

  • RS-stocknr. 742-2671
  • Fabrikantnummer 770-005S206R
  • Fabrikant Glenair
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Glenair Heat Shrink Boots, Straight, Lipless, Zero Halogen Type 2, Series 77

Glenair full nelson lipless heatshrink boots, zero halogen, series 77 type 2 meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These halogen free polyolefin heat shrink boots have good resistance to oils, fuels and solvents and also provide strain relief and environmental protection to connector - cable junctions. Available with an internal coating of R epoxy adhesive (R part number designation) or adhesive free.

Low smoke zero halogen
Meets US and EU toxicity requirements
Temperature range -30 to +125 °C

Approvals

NAVSEA 5617649, VG95343 Part 29, BSG 198-5-DF, EN62329101, SAE AS5258 Type G

Glenair Heat Shrink Boots Full Nelson Series 77

Glenair Series 77 full nelson heat shrink boots provide mechanical and environmental protection to connector - cable transistions. Suitable for many applications including military vehicles, shipboard and petrochemical exploration. These durable heat shrink boots are available in semi rigid elastomer (type 1) and polyolefin ( type 2 smoke and halogen free) material types with or without epoxy R adhesive lining.

Specificaties
Kenmerk Waarde
Sleeve Diameter 36mm
Shrunk Diameter 22mm
Colour Black
Sleeve Type Heat Shrink
Adhesive Lined Yes
Sleeve Length 80 mm
Material Polyolefin
Flame Retardant Yes
Series Series 77
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,04
(excl. BTW)
27,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 23,04
5 - 24
€ 22,58
25 - 49
€ 22,00
50 - 99
€ 21,31
100 +
€ 20,51
Related Products
Heatshrinkable sleeves in polyolefin material allowing the marking ...
Description:
Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling. • One sided printable• Applications include: Wire and cable marking and panel identification• Matte finish• Compatible with TLS 2200, TLS-PC Link, BMP71• Heat-shrinkable• ...
VG standard-compliant heatshrink connector terminal housing with inner ...
Description:
VG standard-compliant heatshrink connector terminal housing with inner lip, angledSuitable for connecting circular connectors on thin cablesEnsure mechanical protection and strain relief.
Plastic strain relief hoods for fitting to RJ45 ...
Description:
Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over ...
Provides a simple, positive splice sealing method that ...
Description:
Provides a simple, positive splice sealing method that offers protection under adverse environmental conditions. Adhesive lined provides waterproofing and strain reliefNo need for greases, tape or epoxyThick wall insulation and abrasion-protectionFlame retardant and heat resistantOperating temp -55°C to 90°CMin ...