HellermannTyton Black 4.5:1, Heat Shrink Tubing 43mm Sleeve Dia. x 750mm Length , RMS Series

  • RS-stocknr. 763-0954
  • Fabrikantnummer 450-20004 RMS 43-10-PO-X-BK (750.0)
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

Cable Repair Sleeving

This range of cable repair sleeve enables quick and safe repair of damaged cable sheaths. Due to the high shrinkage rate and the different diameters, a scope of 15 mm can be covered up to 160 mm. The repair sleeve is up in lengths of 250 mm 1000 mm available

Fast, durable, and labour-saving repair of damaged cable sheaths
Simple and easy to use
High-quality polyamide adhesive inner
Excellent shrinkage
Thermo-chromatic points (TCP) shrink indication
Good corrosion protection properties with excellent abrasion and weather resistance
High UV resistance
Halogen-free

Specificaties
Kenmerk Waarde
Sleeve Diameter 43mm
Shrunk Diameter 10mm
Colour Black
Sleeve Type Heat Shrink
Adhesive Lined Yes
Shrink Ratio 4.5:1
Sleeve Length 750 mm
Material POX
Series RMS
12 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
35,56
(excl. BTW)
43,03
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 35,56
15 - 49
€ 33,78
50 +
€ 32,01
Related Products
Thin-walled universal heatshrink tubing made from polyolefin (PEX)Self-extinguishingNo ...
Description:
Thin-walled universal heatshrink tubing made from polyolefin (PEX)Self-extinguishingNo internal adhesiveVery good mechanical strengthResistant to chemicals and solventsSuitable for bare wires, cable lugs, clips etc.
Heat shrink tubing supplied in useful dispenser boxes ...
Description:
Heat shrink tubing supplied in useful dispenser boxes for easy storage and use. The tubing has an ideal shrink ratio of 3:1, this allows them to fit almost any heat shrink task. Ideal for electrical insulation and equipped with a ...
TREDUX thin wall heat shrink tubing is used ...
Description:
TREDUX thin wall heat shrink tubing is used for general electrical insulation and mechanical protection of cables and wires. It is suitable for use in the solar energy, wind energy, electronics, shipbuilding, and defence sectors. • Thin walled flexible heat-shrink ...
Pinched End Caps can be used for mechanical ...
Description:
Pinched End Caps can be used for mechanical and environmental protection of stub splices in electrical harnesses. PEC pinched End Caps with inner adhesiveDue to the fast and easy installation, these caps can be used for non-electrical applications as well. ...