Ensign 3 440H Hinge Switch, 2NC (Safety), NO (Auxiliary)

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DO
Productomschrijving

Allen-Bradley Ensign 3 Hinge Switch

A compact hinge operated safety interlock switch with the option of 2 safety contacts
Full IP67 ingress protection on all models
Rotateable head facilities 4 possible shaft positions
Only 3° of guard movement required to operate
2N/C, 1N/O or 3N/C controls hollow shaft
Forced guided contacts - complies with EN 1088, IEC 947-5-1

Note

These are not to be used for load bearing applications

Note

This safety device can be used with Guardlink, a new safety linking technology from Allen Bradley Guardmaster.
Guardlink simplifies and reduces the connection time of the safety system, whilst providing real-time diagnostic information over Ethernet IP. This makes it simple to identify the location of the device that has tripped the safety system, thus reducing downtime, and improving the machines overall efficiency. For more details, please go to the Guardlink brochure.

Hinge Switch

Specificaties
Kenmerk Waarde
Range Ensign 3
Series 440H
Lock Style Hinge
Normal State Configuration NO (Auxiliary), 2NC (Safety)
Maximum Current 6 A
Maximum AC Voltage 600V
Maximum DC Voltage 24V
Conduit Entry M16
Shaft Length 80mm
Trigger Angle Range 5 → 14°
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
36,70
(excl. BTW)
44,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 36,70
Related Products
Introducing the XCS PL series. Ideal for light ...
Description:
Introducing the XCS PL series. Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards2 outputs5° displaced tripping angle4 position turret headIngress protection; IP67Slow break safety contacts with positive opening ...
Ideal for light industrial machines fitted with hinged ...
Description:
Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards3 outputs5° displaced tripping angle4 position turret headIngress protection; IP67Slow break safety contacts with positive opening operations (positive actuation) N/C contacts ...
For specific hazardous area approval category details please ...
Description:
For specific hazardous area approval category details please refer to the bullet points for each product.,Approval certificates available on request. AC3 switching capacityCan be locked using padlocks in three positionsIP66 ratedTwo M20 cable entries complete with cable glands3 Isolating Poles ...
Adam safety sensor unit with DYNlink signal and ...
Description:
Adam safety sensor unit with DYNlink signal and reset with indication. M12-5 male connector, yellow. 4pcs of DA 1B distance plate and 4pcs of DA 2B distance rings are included.