Starrett HSS 32mm Hole Saw Bi-Metal, 41mm Cut Depth

  • RS-stocknr. 364-4221
  • Fabrikantnummer DCH0114
  • Fabrikant Starrett
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Starrett 'Deep Cut' Bi-metal Hole Saws

Variable pitch teeth
Positive rake tooth design, efficient swarf clearance when drilling thick materials
Ideal for use on wood, metal (including stainless steel) and plastic
6.5mm arbor required with hole saw diameters from 16 to 25mm and 9.5mm arbor with 32 to 51mm hole saw diameters
Arbors, pilot drills and an ejector springs to aid core removal; are available separately

Specificaties
Kenmerk Waarde
Diameter 32mm
Drill Bit Type Hole Saw
Arbor Included No
Material HSS
Cut Depth 41mm
Number of Pieces 1
Type Hole Saw
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
26 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,48
(excl. BTW)
17,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 14,48
Related Products
The Starrett deep cut bi-metal hole-saws combines and ...
Description:
The Starrett deep cut bi-metal hole-saws combines and aggressive tooth form with an extra cobalt HSS tooth material for enhanced heat and wear resistance. Designed with a 10 mm increase in hole-saw depth, an aggressive material penetration and kerf clearance. ...
• Hardened cutting edge (6tpi alternate set) welded ...
Description:
• Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel body• Bonded construction reduces possibility of shattering• For use with ferrous and non ferrous metals, plastics and wood to a depth of 32 mm• 14 to 30 ...
Bi-metal holesaws for use with battery operated power ...
Description:
Bi-metal holesaws for use with battery operated power tools with 1/4in. Hex drive. The constant pitch teeth means that these holesaws provide an exceptionally smooth cut. Ideal for cutting stainless steel, tool and mild steel sheeting plus plaster board, wood ...
Hardened cutting edge (6tpi alternate set) welded to ...
Description:
Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel bodyBonded construction reduces possibility of shatteringFor use with cast iron, tool and stainless, steel, brass, bronze, aluminium, plastics and wood to a depth of 32mm6.5mm arbor required for ...