Linear Technology LT4220CGN#PBF, Hot Swap Controller

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Hot Swap Controllers, Linear Technology

Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technology’s Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.

These devices are often used in applications such as:
Server rack mount systems
Distributed power systems
Medical Systems, Telecom systems
Set Top Boxes
High side switch/circuit breakers
Switchers / Routers

Monitor, Control and Protection, Linear Technology

Specificaties
Kenmerk Waarde
Hot Swap Controller Type Negative Voltage, Positive Voltage
Typical Operating Supply Voltage ±2.7 → ±16.5 V
Number of Channels 2
External Sense Resistor Yes
External FET N-Channel
PGOOD Output Logic Active High
Mounting Type Surface Mount
Package Type SSOP
Pin Count 16
Fault Management Auto-Retry, Latched Off
Dimensions 4.978 x 3.988 x 1.478mm
Height 1.478mm
Length 4.98mm
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +70 °C
Width 3.988mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 100)
4,838
(excl. BTW)
5,854
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
100 - 200
€ 4,838
€ 483,80
300 +
€ 4,717
€ 471,70
*prijsindicatie
Related Products
A range of highly integrated dedicated high-current LED ...
Description:
A range of highly integrated dedicated high-current LED Driver ICs for use in lighting and display backlight applications.Linear Technology’s LED driver ICs are configured as Inductorless white LED drivers (parallel) or switching regulator based white LED drivers (series). The range ...
Linear Technology high voltage Surge Stopper devices for ...
Description:
Linear Technology high voltage Surge Stopper devices for the protection of loads from over-voltage and high voltage transient damage. These products will find uses in a variety of applications, such as automotive, avionic, and industrial Surge Protection, Hot Swap™ and ...
Provide Safe Hot Swap for +3V to +12V ...
Description:
Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External ComponentsUnique Current Regulation Architecture Minimizes n-FET Linear Mode DurationAutoretry Feature (MAX4272/MAX4273)DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short CircuitsPower-On RESET (MAX4273)15V Absolute ...
Linear Technology created a wide range of battery ...
Description:
Linear Technology created a wide range of battery charger IC offered in linear or switching topologies. They are suitable for any rechargeable battery chemistry this includes Lithium-Ion (Li-Ion), as well as Nickel Cadmium (NiCD) and Nickel metal hydride (NiMH). LTC ...